Jump to content
SAU Community

Does Radiator Need Bleeding?

avalanche

By avalanche,
in General Maintenance

 Share

Recommended Posts

siddr20 Grand Master

siddr20

Posted
Posted (edited)

Yes you deff do..

otherwise after a few weeks, you will have no coolant left..

umm theres a small screw thingy.. I will upload a pic and show you where abouts it is..

post-12579-1176718932.jpg

post-12579-1176718908.jpg

Edited by siddr20
PLYNX Mentor

PLYNX

Posted
Posted

Yes it does ! Theres a 10mm bolt between the head and the intake manifold near where the fuel lines go in and out. You gotta take that out and fill up the radiator till its full start the engine so it pumps the water around the motor and keep topping up the radiator and the air vents out that bolt hole. When the water starts squirting out the hole just replace the bolt and your done.

DjeMz Mentor

DjeMz

Posted
Posted
Yes it does ! Theres a 10mm bolt between the head and the intake manifold near where the fuel lines go in and out. You gotta take that out and fill up the radiator till its full start the engine so it pumps the water around the motor and keep topping up the radiator and the air vents out that bolt hole. When the water starts squirting out the hole just replace the bolt and your done.

So when replacing the coolant, we first drain it, then WHILE we are topping it up, open the bolt?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shizu
      Returning after a long time!

      By Shizu · Posted

      I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Milkmun
      Hello fellow enthusiasts

      By Milkmun · Posted

      Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • DatsunBanana
      Rear subframe stay bracket bolt removal issues

      By DatsunBanana · Posted

      Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • GTSBoy
      [HOW-TO] Winter Steam-Clean & Odour Removal in 30 min

      By GTSBoy · Posted

      I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...