Jump to content
SAU Community

Recommended Posts

Im looking for pic's of gauges custom mounted in to a r33 dash, im getting around 5 gauges 60mm in diameter. Im thinking of putting them above the glove box in a row. If any one has pic's or idea's where to place them it would be great.

Cheers

Dave

Link to comment
https://www.sau.com.au/forums/topic/164964-custom-mounted-gauges/
Share on other sites

Gauages everywhere (unless your a track racer) is a thing of the past... I think it looks rather lame to be honest... I got one Boost guage (high quality thta cost around $400.00) and that's it... one is enough... one looks tough... shows that you're all go and less show... if you have cross-rainbow colour gauages everywhere... to me, it looks like something from a cartoon... up to you though.... and yes, too many gauages will bring the cops onto you...

Im looking for pic's of gauges custom mounted in to a r33 dash, im getting around 5 gauges 60mm in diameter. Im thinking of putting them above the glove box in a row. If any one has pic's or idea's where to place them it would be great.

Cheers

Dave

6 gauges!!! what are they?

boost

oil temp

oil pressure

air/fuel

volt meter

coolant temp (they are all in white face)

shift light

iv only got the boost and oil pressure so far, i might just place them in a row above my glove box and im getting the ash tray mounted gauge pod soon. the engine is getting a hks rebuild so i wana read the engine a bit more, look after her

Edited by cruzin33

its alright if you line them up so when everything is working right, all the needles are straight up, all in the same direction...

then you can glance over and see if anything is wrong...

IF you need that many... :blink:

Edited by DRD-00F
ya im thinking of getting gauge pods made up to put them on a slight angle above the glove box and mould them in

then be prepared to replace your dash if you ever get defected .. that area is the crash zone .. needs to be padded

I suggest mounting them as close to your normal field of view when driving as possibe. That way you only have to take your eyes off the road for 1 second to check them, not turn your head etc.

These are mine - oil pres., oil temp and boost. The HC tells me everything else I need to know.

post-8870-1176971154.jpg

then be prepared to replace your dash if you ever get defected .. that area is the crash zone .. needs to be padded

In adelaide its a bit diffrent, we just cant have them above the dash

Edited by cruzin33
  • 3 years later...

It would have been easier to carbon or glass over the entire hole and cut some new holes to fit but I didn't want to do anything I couldn't undo easily.

Could have just bought another interior piece and done it though :(

Haha, one of those things you just dont think about...

Another idea, my mate drilled a slot into his dash (I know that makes no sense) and pushed his PFC controller into it, so its al eye level directly in front of his when he drifts. Another idea for you racers/drifters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...