Jump to content
SAU Community

Recommended Posts

Hi Everyone.

Some of you may remember this r32. It was for sale a few months ago. I imported the car my self, and unfortunatly it failed compliance due to the 'jacking points' being pushed in more then 20mm. This could have been caused from a number of things, my guess is the car forlifts in japan. The workshop i was using has been shut down, and now im stuck with a car that cannot be 'legally' complied registered.

Everything else about the car is perfect. It drives excellently, it has the power that it should have and it is clean, inside and out.

It is totally ridiculas, but im not going to get into that here because i could go on complaining and winging for ever. Yes i've lost alot of money, and yes i've thought about wrecking it. All because the jacking points were pushed in 2mm more then what is allowed. But i've moved on from cars now and i'm just going to cut my losses and sell it as is.

Basically, the car is is in very good condition. Hard to believe for a car that got rejected hey? The motor is in perfect (82,000kms on clock) and the gearbox is tight and the clutch is bouncy and fresh. The car was resprayed Gold in japan. It is very tidy inside and out, and looks great as you can see from the pics.

All the compliance work has been carried out on this car (full service etc, even though it isn't complied) and i've driven this car about 500kms, just on a dealer plate and had no problems what so ever.

Its a Gold 1990, r32 Gts-t Type M

Manual

Turbo

Aftermarket suspension

The steering wheel was returned to stock as well as the gearknob.

The exhaust, podfilter, gage and turbo timer have been removed, and i will be removing the cd player and radio.

I'm after $5500

Any questions etc, just post, or email at [email protected] or call on 0422373164

Regards

Mondial

post-2280-1176902976.jpg post-2280-1176903000.jpg post-2280-1176903011.jpg post-2280-1176903024.jpgpost-2280-1176903047.jpg post-2280-1176903061.jpg post-2280-1176903076.jpg post-2280-1176903086.jpgpost-2280-1176903097.jpg post-2280-1176903155.jpg post-2280-1176903165.jpg post-2280-1176903175.jpgpost-2280-1176903184.jpg post-2280-1176903203.jpg post-2280-1176903213.jpg post-2280-1176903223.jpgpost-2280-1176903232.jpg

Edited by Mondial
Link to comment
https://www.sau.com.au/forums/topic/165155-sold/
Share on other sites

mate the easiest way would be to part it out.

r32's are getting old so a lot of things would need replacing on them.

although it would be a shame to see such a nice car being wrecked, but whatyado

good luck

Link to comment
https://www.sau.com.au/forums/topic/165155-sold/#findComment-3061491
Share on other sites

My worst nightmare...compliance...sorry to hear about your bad luck...

Where bouts u located? (if its there i must be blind...)

Yes this car can be used for whatever you want, just not on the road.

You only get one chance at compliance, if it doesnt pass, it doesnt pass.

Link to comment
https://www.sau.com.au/forums/topic/165155-sold/#findComment-3061716
Share on other sites

thats so unfair. Surely you couldn't have the points super reinforced or something, then go back to a different engineer, it would probably be stronger than it ever was, and worthy of ADR's.. I would think.

Also can you claim anything throught the shipping insurance, or hold the car yard responsible perhaps?

Link to comment
https://www.sau.com.au/forums/topic/165155-sold/#findComment-3079349
Share on other sites

i hope this rule isnt the same for chaasis rails my r33 is on the way from nz both front ones are pushed up on the insides cose some idiot used a trolley jack on it for its wof(rwc there)to jack it up...oh dddddaaaammmmmm.......while im here anyone know if my car can be complainced there using my tein adjustable suspenion??its a personal import..your rules are all over the place and very silly someone needs to clean it up sorry for hi jacking ya thread...

Edited by mr rb25 r33
Link to comment
https://www.sau.com.au/forums/topic/165155-sold/#findComment-3081993
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Car looks clean as. You ended up getting quite a bit done 😂  So what's the plan for the exhaust? 
    • The only Neo rods that were any different to any other RB25 rods were the DET ones, and they were the same as RB26. Here is a Neo DET rod. O5U part number visible. Here is a post in a thread here on SAU with evidence from someone who has done this before. There are photos in the thread of normal RB25 rods.  
    • Sure, but why assume that will be the case forever? And why assume you'll be able to do an oil change to swap back to a stock drain bolt before that happens? And does it even matter when I change the oil at fairly short intervals? Life can be funny sometimes and unexpected things can happen. Like breaking a collarbone so you can't do any work on your car for a few months but the oil change is due so you have to take it to somewhere and hope they don't do something stupid like stacking the new drain plug washer on top of the old one.
    • Do u know how to identify the rods are rb25 or neo ones? Can u look into the pics and tell me is they de or de neo ones. Its confusing becoz my motor has de neo head but block is 25de 75t, so really confusing me about rods, crank.
    • Are you talking about the oil squirters? There is only one place for them to go. Yes, you have to drill the holes. Yes you have to obtain the correct oil squirters (I presume there is some sort of aftermarket option available, because original turbo ones are going to be a diminishing resource).
×
×
  • Create New...