Jump to content
SAU Community

Recommended Posts

Hi Everyone.

Some of you may remember this r32. It was for sale a few months ago. I imported the car my self, and unfortunatly it failed compliance due to the 'jacking points' being pushed in more then 20mm. This could have been caused from a number of things, my guess is the car forlifts in japan. The workshop i was using has been shut down, and now im stuck with a car that cannot be 'legally' complied registered.

Everything else about the car is perfect. It drives excellently, it has the power that it should have and it is clean, inside and out.

It is totally ridiculas, but im not going to get into that here because i could go on complaining and winging for ever. Yes i've lost alot of money, and yes i've thought about wrecking it. All because the jacking points were pushed in 2mm more then what is allowed. But i've moved on from cars now and i'm just going to cut my losses and sell it as is.

Basically, the car is is in very good condition. Hard to believe for a car that got rejected hey? The motor is in perfect (82,000kms on clock) and the gearbox is tight and the clutch is bouncy and fresh. The car was resprayed Gold in japan. It is very tidy inside and out, and looks great as you can see from the pics.

All the compliance work has been carried out on this car (full service etc, even though it isn't complied) and i've driven this car about 500kms, just on a dealer plate and had no problems what so ever.

Its a Gold 1990, r32 Gts-t Type M

Manual

Turbo

Aftermarket suspension

The steering wheel was returned to stock as well as the gearknob.

The exhaust, podfilter, gage and turbo timer have been removed, and i will be removing the cd player and radio.

I'm after $5500

Any questions etc, just post, or email at [email protected] or call on 0422373164

Regards

Mondial

post-2280-1176902976.jpg post-2280-1176903000.jpg post-2280-1176903011.jpg post-2280-1176903024.jpgpost-2280-1176903047.jpg post-2280-1176903061.jpg post-2280-1176903076.jpg post-2280-1176903086.jpgpost-2280-1176903097.jpg post-2280-1176903155.jpg post-2280-1176903165.jpg post-2280-1176903175.jpgpost-2280-1176903184.jpg post-2280-1176903203.jpg post-2280-1176903213.jpg post-2280-1176903223.jpgpost-2280-1176903232.jpg

Edited by Mondial
Link to comment
https://www.sau.com.au/forums/topic/165155-sold/
Share on other sites

mate the easiest way would be to part it out.

r32's are getting old so a lot of things would need replacing on them.

although it would be a shame to see such a nice car being wrecked, but whatyado

good luck

Link to comment
https://www.sau.com.au/forums/topic/165155-sold/#findComment-3061491
Share on other sites

My worst nightmare...compliance...sorry to hear about your bad luck...

Where bouts u located? (if its there i must be blind...)

Yes this car can be used for whatever you want, just not on the road.

You only get one chance at compliance, if it doesnt pass, it doesnt pass.

Link to comment
https://www.sau.com.au/forums/topic/165155-sold/#findComment-3061716
Share on other sites

thats so unfair. Surely you couldn't have the points super reinforced or something, then go back to a different engineer, it would probably be stronger than it ever was, and worthy of ADR's.. I would think.

Also can you claim anything throught the shipping insurance, or hold the car yard responsible perhaps?

Link to comment
https://www.sau.com.au/forums/topic/165155-sold/#findComment-3079349
Share on other sites

i hope this rule isnt the same for chaasis rails my r33 is on the way from nz both front ones are pushed up on the insides cose some idiot used a trolley jack on it for its wof(rwc there)to jack it up...oh dddddaaaammmmmm.......while im here anyone know if my car can be complainced there using my tein adjustable suspenion??its a personal import..your rules are all over the place and very silly someone needs to clean it up sorry for hi jacking ya thread...

Edited by mr rb25 r33
Link to comment
https://www.sau.com.au/forums/topic/165155-sold/#findComment-3081993
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Aren't these run off of high voltage in OEM applications? Like 200+V. Or at least 48V in mild hybrids. At ~18,000 BTU ballpark nominal capacity the power draw is at what, 2.2 kW? ~185A is a pretty crazy amount of amps. At 200V it's only 11A. The 70A nominal kits with up to 100A peak draw I see for stuff like classic Porsches have pretty substantial compromises like shutting off at idle and not actually managing to keep the interior cool in hot conditions because they can only output like 6000 BTU. IMO if I had to pick what high amp draw component to retrofit to these cars I would start with the engine fan, not the AC compressor. You need an ~850-1000W brushless fan, something like this: I would love to see the data but I would bet that whatever you save by running the AC compressor in a more efficient regime with an electric motor you're probably losing to conversion losses anyways. It's not really like a clutch fan where you're losing power all the time even when it's nominally disengaged and it gets worse as it engages because the envelope tracking isn't that precise.
    • I am a volunteer marshal at the Grand Prix. As such, I get a "friend / family" ticket. It is a general admission ticket, valid for all 4 days. Anyone interested in my spare pass, please DM me. Ticket is "free, gratis and no expense".
    • agreed, the price vs gains it’s there.   unless you go china supercharger. Temu racing anyone?😂https://www.facebook.com/share/15nkfpsg7Z/?mibextid=wwXIfr that was one of the ones that popped up on my feed 😂
    • Bit of a long shot but if anyone has 4 of these laying around in new or near new condition. I will happily buy them off you.     https://skylinespares.com.au/product/stabilizer-door-glass-inner-new-8032404u03/?srsltid=AfmBOop6L5EgUFaHPHiVXoAhv5k8aJYwc77nGmoApp-hY03OiOsNVaOv Thanks 
    • I'm wondering is the Toyota and Mazda "collaboration" could see that new Toyota ???G20 ??? turbo engine that they have been showing off recently into a future MX5, apparently it's good for 400hp out of the box That could easily, possibly, be much better than the last collaboration between Toyota and Subaru with the boxer engine in the twins
×
×
  • Create New...