Jump to content
SAU Community

D-max Ceffy Kit

Guest a31rb25

By Guest a31rb25,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Mr Eps Grand Master

Mr Eps

Posted
Posted

the side step and rear bar i like but the front bar doesn't follow thru with the style?

very agressive kit but

i don't wanna be accused of being a serial hater but to me it just looks like eery other cefiro kit.... sorry, i'm sure they work very hard

Link to comment
https://www.sau.com.au/forums/topic/165226-d-max-ceffy-kit/#findComment-3061606
Share on other sites
Mr Eps Grand Master

Mr Eps

Posted
Posted

having looked at the site extensively now, i can honestly say this stuff SUCKS

it's very ugly in my opinion, maybe to the drifting crowd it appeals to them, but it just looks gross in my opinion like i know nobody asked me but that's just what i think

Link to comment
https://www.sau.com.au/forums/topic/165226-d-max-ceffy-kit/#findComment-3061625
Share on other sites
Starionturbo Mentor

Starionturbo

Posted
Posted

That kit and fenders looks hideous.

Personally I beleive its very hard to find a nice ceffy kit, the Uras style suction cup kits are the only ones available and I rekon they all look like shit.

Gives the car a cheap fiberglass look, instead of something stately. Wide fenders on them (front and back) look hideous. It changes the whole proportions of the car.

The car is a squared off car, and squared off kits give them the Killer look. Ive only seen about 2-3 squared off kits that look really nice, one was a Ceffy In NZ.

I dont MIND the origin sideskirts and rear bars though!

Link to comment
https://www.sau.com.au/forums/topic/165226-d-max-ceffy-kit/#findComment-3074008
Share on other sites
A31cefiro Community Regular

A31cefiro

Posted
Posted
those rear guards are pumped nice and hard.......look amazing, more people gota do that down here

ill be giving mine a red hot go next week, have to fit 18x11 -11 under the rear of mine :worship:

with some extreme stretch i only have to go an inch or so outwards :mellow:

Link to comment
https://www.sau.com.au/forums/topic/165226-d-max-ceffy-kit/#findComment-3077402
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • GabsReDeal
      R32 GTS (RB20DE) clogged cat

      By GabsReDeal · Posted

      Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Milkmun
      NC MX5

      By Milkmun · Posted

      Hope the cans went down well at least 
    • Milkmun
      Neil's R33 Gts-t Build

      By Milkmun · Posted

      255 can't go wrong with the price.
    • Kinkstaah
      Neil's R33 Gts-t Build

      By Kinkstaah · Posted

      When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...