Jump to content
SAU Community

Recommended Posts

Dear all,

Sorry, it's me again... as most of you know, my vehicle got defected for performance mods 2 weeks ago... well, just to update you, I've fixed up all my mods (removed mods rather)... so now what is the next step? Take it to a licensed tester/mechanic and get a RWC... after that, what do I do...

I'm guessing I then take my canary and WRC and bring it to VICROADS to get them clear my defect and then I'm free as a bird again? Any other procedures? The following still remain on my mind...

1) I've heard some people say if I got EPA(ed) - it should have been written on the sheet (which I didn't get) and the cops didn't mention it...does this mean I am safe - it has been over 2 weeks now... still nothing from EPA, does this mean I am ok and no need to take vehicle to the EPA?

2) When I bring my car to VICROADS... can I drive it there (on the back of the sheet, it says ok to drive from and to tester/VICROADS, is this correct as my driving period has expired recently but not my 28 days)?

3) When I bring my car to VICROADS - would they personally come out and have a look at it piece for piece or do they take the WRC for what it's worth and then it's stamped and done- deal? CAn this be done on weekends??

Many thanks everyone!!

Regards,

Link to comment
https://www.sau.com.au/forums/topic/165290-yellow-canaries-need-some-advice/
Share on other sites

so you were asked to get a rwc were ya?

yeah you just take the car to vicroads, they'll have a look at the paper and see what you were defected for then they'll tell you to put your car in the inspection bay. they'll come out and check to see if your defects have been fixed then they'll tell ya to take the sticker off and off ya go.

  R-SPEC said:
so you were asked to get a rwc were ya?

yeah you just take the car to vicroads, they'll have a look at the paper and see what you were defected for then they'll tell you to put your car in the inspection bay. they'll come out and check to see if your defects have been fixed then they'll tell ya to take the sticker off and off ya go.

Thanks bro... yeah, that's right... I have to get a WRC.... am finding it hard to find a 'lenient' place... do you have any ideas?

Regards,

There is no such thing as a "lenient" place these days

VicRoads is strict, people found to be giving lenient RWC instantly have thier license removed, and its happened to a number of places i know.

1) Can be upto 6 weeks for the EPA notice to come in the mail.

2) The notices you have are all very clear on what you have to do. Depends when the car was pinged, the last drive date etc.

But the notice will have all that, if you still dont understand, ring VicRoads.

3) It can only be done during VicRoads office hours, if you dont know what they are. Ring them as they are closed on weekends.

As for the car, they might go over it, they might not. Again, you will need to ring up and confirm this

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...