Jump to content
SAU Community

Recommended Posts

Hi everyone,

There are a few 2nd hand Blitz BOVs going around and they seem to be pretty good value except they aren't plumb back which is what I'm after.

The little trumpet section seems to be screwed on and I'm wondering if anyone know if there is a replacement for that part which has a plumb back attatchment.

Anyone?

Thanks :D

Link to comment
https://www.sau.com.au/forums/topic/165344-blitz-bov-and-plumb-back-options/
Share on other sites

Really? Thats pretty interesting.

The whole reason i was going for an aftermarket BOV was cause i now have fluterring on the standard BOV after the turbo upgrade, and i was under the impression not enough air was being passed thru so i had back pressure on the turbo compressor blades.

Am i wrong? (probably haha)

Anyway, one of these if peeps dont' know what i mean :

http://page15.auctions.yahoo.co.jp/jp/auction/t34217191

The pic shows 2 different available attatchments.

having a bov is a myth. there is no proven damage to ur turbo by running no bov. CA18 and I believe some SR20det came with no stock BOV and I know of one CA18det which has been going on with its T28 turbo for a good 4 years without a bov.

BOV are myths, but I love the sound.

Sure, no damage to turbo, but you have to admit that your turbo should still be spinning at a higher speed after a gear change.

Besides, some cars didn't have intercoolers, doesn't mean there's no point :rolleyes:

Hey, you've got a Blitz Supersonic Bov !!! Haha :D

BOV's are not a myth on a Skyline whos ECU expects it to be there. Please dont post silly information.

Birnie, its almost a direct swap... PM me if you want more details as i have it im a PM somewhere, just no time no to go leaf through a few 1000 PM's to find exactly what another person did.

Cheers

having a bov is a myth. there is no proven damage to ur turbo by running no bov. CA18 and I believe some SR20det came with no stock BOV and I know of one CA18det which has been going on with its T28 turbo for a good 4 years without a bov.

BOV are myths, but I love the sound.

agreed been running high hp cars for years with no bovs.

You said having a BOV is a myth

That is not correct. On a car that has an AFM and ECU settings like a sykline, its required

unless you live in thommo and want dose...... which every second r33 has :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Lads Anyone have or know where i can find the wiring diagram for the dash cluster of a 2003 V35 Skyline? The G35 one is not the same as the V35 Thank you!
    • Ok will do, I think I originally had 1 bolt off for the sway bar on when I took off the strut but will give this a ago. Thanks Duncan! My sway bar has play also when I move it around, hoping that's the source of my squeaking because I can't find anything wrong elsewhere
    • odd. I thought all the top race teams used them.
    • undo the sway bar link, put it on last. put a jack under the outer ball joint on the lower control arm to raise the hub and off you go
    • I don't know how this is even possible. I removed the strut to do some work (it came out fine, and keeping in mind that I didn't put things back in the same order, but did this on purpose because I was supposed to remove the strut originally instead I tried to remove other shit first which made things a head ache) but now the problem is that it won't go back in. The alignment between where the bolt hole for the strut is and the j arm where the strut slides onto is way off, about a 10cm difference or more. In order to make it fit I'd somehow need to push it up. I tried to compress it with a spring compressor and install it but the compressor was getting in the way and there was no working room. On the photo you can see the difference between the shock and the thread that it's supposed to go on. The only things I removed in total were - the top bolts for the j arm but I didn't remove the actual j arm - the 3 bolts that hold the plate for the brake lines - the sway bar link (this bolted on back fine) - the strut/shock absorber
×
×
  • Create New...