Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

haha results posted........In first thread

Also I used united fuel Boost98..

Im stll shocked it made this power I wasnt expecting any more then 200rwkw..Im happy.

See yous at the SAU dyno day nsw's peoples..

Cheers

Liz & D

I GOT RESULTS BACK - I am suprised with the results and Matt done a great job....

234.9RWKW@11/12psi.( I dont know why it ran the higher psi as it has an rb20 acuator on it.

Only issue I had was with the spark plugs, it was blowing out the spark at this boost level, there copper and were gapped to 1.1 now Matt regapped them to 0.65.

He didnt mention anything about fuel, afm or anything and they were working quite well at this boost level..

I am curious to see what it will do when i finish what I want to do with it, just a few more minor mods.

AFR's were good to between 11.8 t 12.0.

Well done

i like more auto's having a crack.

good effort on safc etc but that turbo is certainly a pig.

The Auto Hack Paul was talking about isnt realy a hack or anything technical.

simply un plug the brown connector down behind the drivers side head light and it will lock the trans in 3rd gear.

once your finished on the dyno plug it back in and away you go. 1st , 2nd , 3rd..

i notice your dyno was done in drive so it might explain the massive loss in midrange, as he would have to go very easy on the throttle so it dosent kick back to second. thats of course assuming he dosent know about the brown plug.

attached is my old turbo and my current turbo

both running rb25det auto

if you compare midrange power at say 100kmph your not even close.

but both runs on my car are with a PFC but i still think your turbo may be dragging its feet a little..

cheers

Darren

post-24852-1177067741.jpg

post-24852-1177067758.jpg

Dangerman,

Yeh he was taking it easy until he would reach a certain klm so it would not kick back, it was constantly kicking back on the dyno...

THe turbo is good for what it is though..i know its no gt30 but I wouldnt call it a pig...on the street im pretty sure im gettn 11/12psi by 3000rpm..

it is annoying though as first gear is wheel spin time.....

I would like to get it run again to see its proper power band...i say ill do it at the SAU dyno day, take that brown plug out..

Midrange does suffer a little on the dyno graph but I dont think its reflects this when drivin in real life conditions on the road..

I would get a PFC if I had the money, but as you can see per the mods I havnt spent much at all..a budget build you could say..

Im still wrapped with the power...

Cheers

Does any1 rekon the boost 98 from united helped me along at all...

Im quite interested in fuels and their advantages and thats the reason why I choose the boost98 as it has sumting like 5% ethanol in it...Ive read quite a few articles claiming its miracles, the ethonal that is and how it has to be tuned to it...

Before I got it tuned i used bp 98 and boost 98..untuned the bp98 felt way better, the ethonal decreased power.

I wanted to use shell v-power racing but I cant even find it in sydney yet...

Let me know your thoughts...im still wondering why the power was so high..the dyno is a pretty average reading dyno(DD) aswell.

Cheers

Looks like a BOOSTD style Hiflow, low boost and cliff like power curve. VG30 rear housing and a highflow front wheel on the stock RB25 turbo.

REV210, what are the specs or how do these BOOSTD turbos rate? all I know is that the previous owner said it is rated at 450hp?

Also with the power curve I dont think it represnts it well as the tuner had to bring it on slowly to avoid it kicking back a gear..I will do the mod where it locks in 3rd gear on the SAU dyno day and then see how it goes...

Also you know the goods on fuels, what is your view on BOOST98 from united petrol..did the ethanol help?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You see R34 GTRs listed for 200-300k are they really selling for these prices? Kinda seems like the same ones listed all the time. Even with R33 GTSTs looking at gumtree. You have an auto with a bitsa interior for 35k. Another one needs an engine rebuild and asking 24k. And then you have a stock in better than average condition for 45k. Nobody is ever going to pay these prices.
    • Only needed to pull out the seats, center console and gear shifter surround, took a weekend and a fair few beers. You get to look forward to finding all sorts of weird shit under the seats and carpet, I pulled out a Chinese dudes passport from 2003, 220 yen and a condom wrapper 😆
    • Well, turns out not a lot happened from back then to now, between life again, and working on 3 separate other cars (only one of which was mine, and will now be departing the household soon).   So I decided with the whole "don't go outside, it's a cyclone!" Turning in to being not a whole lot, I ventured down to the garage, found a couple of water leaks in the shed (the main one I've already fixed), and then ended up "stuck" as it started pouring rain, and I didn't want to walk back inside in the pouring rain. This meant I ended up taking a look at the Skyline, and trying to work out what past Matt had been upto. I retraced a few things out from scratch, added the rest of the power feeds in that I needed for the indicators, and headlights. Double checked I'd wired a few things up correctly (and worked out how I wired a few things to begin with), updated my sparse notes. Added one of the ground points. Oh, and got really really dusty, as the car is quite dirty. Wrote up quickly what should be left for me to do with the wiring too. Adding the below photos more for my records than anything else. I need to make myself a proper book for the car that details everything, and how I've done it, but for now, this is my records... The third image is my most important one for me, and I need to draw it out into a proper schematic eventually. The last photo is my re-written list, I'd have put it on the white board, except I had to take the white board down to fix one of the water leaks.
    • Can try Maxima. Or random Infiniti models from the same era. Good luck with your hunt, let us know what you find!
    • Shall we... wake you up when September ends?  
×
×
  • Create New...