Jump to content
SAU Community

Recommended Posts

Hey guys, i have never experienced this before, but i can realy smell my exhaust man, especialy when i have somene sitting in the passenger side and there window is down the whole car fills with it? I have never had this prob with other cars, i have a 3 inch from the cat back and rest is 2 and a 1/4 to the head. Is the muffler causing this or my cat? Its realy annoying and kinda puts me off having anyone i the car with me, it only creaps in from the passenger side...wierd.

Oh and how the hell can i fit in my new Boston 6's in the rears? My mate told me to lift my rear seats but i cant, im scarde il F2ck it up.I attempted and it wont budge.

Any help will be appreciated guys cheers.

Link to comment
https://www.sau.com.au/forums/topic/165468-my-exhaust-smells-bad/
Share on other sites

you've got an exhaust leak mate. you're probably running rich too so it wont help with the fumes coming into the cabin. take it to where you got the exhaust done and they'll get it onto a hoist and check out where its coming from and seal it.

if you did it yourself then get your car up on some ramps, get a mate to turn the car on then check where the leak is coming from underneath. be careful not to breath in the fumes.

as for the speakers, get some spacers made up and a really short screw driver.

If you get a rag and hold it against the tailpipe you should be able to hear and feel the pressure. If you hear it leaking somewhere else then exhaust leak.

I'd also check the exhaust manifold for a failing gasket.

Finally, your cat could berooted or non existent and or you're picking up all the nice sulfides/sulfates(?) in the petrol (eggy smell?).

hey guys, thanks for the quick responses, i forgot to mention i had already replaced the pipe that connects to the muffler as they recomended re wedling is not a fix, it could reopen down the track, so i though i had cured the stench, it seemed to have restricted it abit because the smell wasnt that bad. I think it might be the cat, when you mean "gone" do you mean that the mesh is completely melted or warped as i have seen before in another car?

No eggy smell just a powerful exhaust smell, i never pick it up when im driving but when my mate had a spin in it i felt it realy bad from the passenger side, perhaps they didnt pick another leak near the cat? I guess il find out when i take it for check up.

I took it to Hi-Tech, i thought they wouldnt overlook this sort of things.

As for my seats il try to rench it with the screwdriver as recommended, does it pop up i dont wanna break anything, this car is mint condition in interior.Its bottom seat then the back right?

I've only ever smelt the eggy smell from cars with new cats.. Or new cars when they boot it in front. Usually Mitsubishi's for some reason.

No cat... No eggy smell just a strong exhaust smell that is very noticable. I have a few mates with no cat and driving behind them I can smell they have no cat. :S

hey guys, thanks for the quick responses, i forgot to mention i had already replaced the pipe that connects to the muffler as they recomended re wedling is not a fix, it could reopen down the track, so i though i had cured the stench, it seemed to have restricted it abit because the smell wasnt that bad. I think it might be the cat, when you mean "gone" do you mean that the mesh is completely melted or warped as i have seen before in another car?

No eggy smell just a powerful exhaust smell, i never pick it up when im driving but when my mate had a spin in it i felt it realy bad from the passenger side, perhaps they didnt pick another leak near the cat? I guess il find out when i take it for check up.

I took it to Hi-Tech, i thought they wouldnt overlook this sort of things.

As for my seats il try to rench it with the screwdriver as recommended, does it pop up i dont wanna break anything, this car is mint condition in interior.Its bottom seat then the back right?

For the exhaust side of things its defenately got a leak somewhere and like someonestolecc said, get someone to stuff a rag in the tip of the exhaust and let the car idle and you should hear where the leak is coming from.

To get to the rear pastral (spl?) shelf to take out the stock speakers you do the following steps:

1. The bottom of the seat is held down by two 12mm bolts, one either side, undo them and then lift the front of the seat up and it will slide out.

2. Once that is removed you will see that the remaining back of the seat is held in by two bolts near the bottom. Undo those then you will need to left the seat directly upsince it is held on a hook and it will left off.

3. The pastral shelf is just held in by clips, so undo the front ones that are visable and the others arent visable but when you left up they just come undone. If you have child restraint anchors on the back shelf you will need to undo those before you can take the shelf off.

*note, if the car looks like it has never been apart before (which is very rare anyway), things are going to be slightly harder to take off because all the clips and stuff will be tighter, but just ease it off and nothing will break.

Edited by R34GTFOUR
For the exhaust side of things its defenately got a leak somewhere and like someonestolecc said, get someone to stuff a rag in the tip of the exhaust and let the car idle and you should hear where the leak is coming from.

To get to the rear pastral (spl?) shelf to take out the stock speakers you do the following steps:

1. The bottom of the seat is held down by two 12mm bolts, one either side, undo them and then lift the front of the seat up and it will slide out.

2. Once that is removed you will see that the remaining back of the seat is held in by two bolts near the bottom. Undo those then you will need to left the seat directly upsince it is held on a hook and it will left off.

3. The pastral shelf is just held in by clips, so undo the front ones that are visable and the others arent visable but when you left up they just come undone. If you have child restraint anchors on the back shelf you will need to undo those before you can take the shelf off.

*note, if the car looks like it has never been apart before (which is very rare anyway), things are going to be slightly harder to take off because all the clips and stuff will be tighter, but just ease it off and nothing will break.

Thanks for that dude, will do. an yea, its actualy so clean the speakers in the rear, if you check em from the boot they are original, the cones have turned to dust!My mechanics couldnt believe how original the car is motor wise.Thanks again everyone.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • He's right ~ there is no 'magic' with stuff like this ... it is more likely that in the process of looking for the short, the loom/wire 'incidentally' got moved in the process, thus removing the short ~ now, that maybe a wire (in a loom) rubbing against the edge of some grounded metal, that's worn through the insulation, causing the (now intermittent) short to ground. If one wire in a loom has been damaged in this fashion, it's reasonable to presume that other wires beside it may have also be damaged, and now exposed...you can bet the green crusty copper corrosion will start... ...that'd be a pisser, Murphy's Law steps right in as GTS observes...but worse, something like that is easier to find when shorted...ie; unplug bulb and fuse, and put multimeter in continuity mode so you get constant beep, and carefully poke about hoping to find if some movemet of the harness stop the beeping.... ...it's still all a bit Arnie tho' ..It'll be back... 😃
    • Yeah, but knowledge of one wire's insulation worn through to short on earth implies the possibility of other wires doing the same. I had my power steering die, because the wire that runs to the solenoid valve on the rack runs in the same loom as the power wire for the O2 sensor. And when the O2 sensor/wire did something stupid and burnt part of that loom to death, the only indication was the shit(ter) fuel economy and the heavy steering. It took deep excavation of the looms in the bay to find the problem. Not wear through in that case, but similar shit.
    • Ah, I thought he'd wired it to one of the spare ECU inputs! Too long ago since I read that post, ha ha. I've been arguing with radiators, harmonic balancers, alternators and rust since reading it.
    • Correct. The ECU cannot read oil temp. (Well, I think it probably can in some situations. I did have the thought of potentially repinning the ECU when I was doing oil pressure). I am using this into the MPVI dongle, so that the MPVI dongle can read oil temperature. It is attached to a VDO gauge which is obviously calibrated to whatever curve the sender actually is using. This would be easy if I could setup a table of voltage to temperature like many sensors, but it appears I cannot do this and can only setup the transform rule which appears to be Input (voltage) x Multiplier, and add an offset. This to me means it MUST be linear. So it may be a complete waste of time wiring this into the ECU. The idea was that the MPVI3 has standalone logging. I wanted to use this instead of a laptop with serial cable (for wideband) for long datalogs. Given the wideband also has electric interference, I may never trust this either in a world where the serial wideband and the analog output wideband do not agree. Last time I did a trace I could see the two wideband traces follow each other, but one was a little leaner than the other. I plan on playing with voltage offsets and actually driving the thing to see how close they correlate. If they never correlate... then, well, maybe I'll never use either. Ideally I'd like to have the Analog wideband read ever so slightly leaner than the serial one, because the serial one is 'correct'. Tuning the car to be ever so slightly too-rich would be the aim. Not needing to have a laptop flying around in the footwell connected with cables is... an advantage. About the only one from the forced upgrade to MPVI3.
    • Hopefully not, since he knows the fuses work ha ha ha
×
×
  • Create New...