Jump to content
SAU Community

R33 S1 Speaker Question!

dr1ft3r

By dr1ft3r,
in Car Audio & Electrical

 Share

Recommended Posts

dr1ft3r Collaborator

dr1ft3r

Posted
Posted

hey, im curious as to what size speakers people have put into their r33's. ive been told that only 6" is all that fits. and by others that 6.5" and 7" fits perfect. ive found some 6.5" splits for the front that i like. but want to know for sure if they'll fit or not first. also what fits in the parcel tray. thanks people!

Link to comment
https://www.sau.com.au/forums/topic/165893-r33-s1-speaker-question/
Share on other sites
J-D1zzL3'z_R33 Explorer

J-D1zzL3'z_R33

Posted
Posted

hey man

i think 6.5" splits will fit in the front. well im guessing they would!!

but in the rear i think you'll have to go with some 6x9's!

but don't take my word for it, could very easily be wrong!! ;)

cheez Mentor

cheez

Posted
Posted

i got 6" in the front, they fit perfect, cant see why u cant put 6.5" in with little modificatin.

in the back i got 6x9's but i need spacers. i then recarpeted the shelf and make it look like its a moulded parcel. will get pics of shelf if u want but inregards to front shouldn't be a prob.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted
hey man

i think 6.5" splits will fit in the front. well im guessing they would!!

but in the rear i think you'll have to go with some 6x9's!

but don't take my word for it, could very easily be wrong!! ;)

6" (6.25 on stock mounts) front - 6.75 rear. with custom mounts anything is possible. 6x9s - no no without a LOT of work.

  • 2 weeks later...
Trav33 Mentor

Trav33

Posted
Posted
6.5" will fit if you make an MDF ring to sit them on.

6x9s in parcel shelf are easy. did them last week for -R33GTS- All you need is spacers and they sit perfectly.

So you need a MDF spacer to pull the speaker away a bit, is that so it fits in the hole - or so the back of the speaker doesnt hit the inside of the door?

I'm thinking this is what fhrx did here:

8.jpg

Cleutin Apprentice

Cleutin

Posted
Posted

yep.

when i did R33GTS's spacers i made a template so i can just make them when ever i need to without having to measure up again. pretty much the same as Fhrx's. i used 6mm MDF and i had no worries.

for the 6x9 spacers, he already had a set in, but 16mm spacers would work a treat if u were to buy pre made ones.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

only things with the ones FHRX show is this. pull your door off, note where the tab is on the back. that is the door pocket seal. with the ones pictured that block is gone and anything in the door pocket goes straight into the door. I usually make an exact copy of them that way you dont loose things.

  • 4 weeks later...
ray350 Newbie

ray350

Posted
Posted
yep.

when i did R33GTS's spacers i made a template so i can just make them when ever i need to without having to measure up again. pretty much the same as Fhrx's. i used 6mm MDF and i had no worries.

for the 6x9 spacers, he already had a set in, but 16mm spacers would work a treat if u were to buy pre made ones.

hi mate can u tell me where i can get some spacers off the internet for my 6x9s to go in my rear shelf r33series1gtst

thx ray

dnbutts Experienced

dnbutts

Posted
Posted

im probably going out to buy a set of 6" to fit in the front + rear on the weekend and will be running off an amp. Anyone know if Alpine do a 6" speaker? Would preferably like to go with Alpine but all i can find is 6.5"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
    • GTSBoy
      Question about BoV on RB25DET NEO

      By GTSBoy · Posted

      Stock bypass valves are good for plenty of boost.
    • GTSBoy
      r34 starting problem

      By GTSBoy · Posted

      Check for fuel flow out of the outlet end of the rail. Check for spark. Try to start with aerostart (or pressure can brake cleaner or similar solvent in a car) prayed in through TB. If you have fuel and you have spark and it will fire on substitute fuel, then seriously suspect that E85 sitting for ages in your fuel system has destroyed something and put it in your injectors.
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Nissan stock oil pressure is typically about 1 bar at 1000 rpm plus about 1 bar per thousand revs on top.
    • GTSBoy
      R32 GTST - 600KW+ RB28/CD009 Build

      By GTSBoy · Posted

      Luckily for safety applications, with dedicated links not being used for any other traffic, you simply run ProfiSafe (or an equivalent safety comms protocol from other vendors) over the top of ProfiNet (if that's what you're using, or Ethernet IP if you're stuck in the world of American PLCs and not verking vis ze Chermans) and the redundancy is more about being able to know that you need to cause a system diagnostic lockout because you've lost one of your comms channels, rather than not knowing that you've lost your only comms channel. Granted, heartbeats and all that are possible and useable and all that, but some safety applications are are so time critical that you might not be able to afford a few milliseconds until the next check.
×
×
  • Create New...