Jump to content
SAU Community

Recommended Posts

Specs are as follows.

Drop axle (designed for LOW cars)

Beaver tail (4" rear bed drop, again designed for use with low cars)

Extended draw bar for extra stability, specifically at highway speeds.

FIVE near NEW tyres (Done a few thousand klms)

Heavy duty winch.

Hydraulic disc brakes on front axle. Work very well.

Roll-formed guards

"nerf" bars

Checker-plate floor

Front cross bar has been kept LOW to enable lowered vehicles to overhang without tearing off bodykits etc.

Ramps slide away underneath rear of trailer for safe storage.

Trailer weight = 480KG!!!!!!

2 Tonne GVM

Rego till december 2007.

Even with my car riding 87mm off the ground (at the chassis), i have only ever had the exhaust scrape slightly........I cannot stress enough.........this trailer is great for LOW CARS.

I have travelled as far as Melbourne and Adelaide wih ths trailer, and found that even at highway speeds it is very stable. Most of you have seen it at the track, or even on the road, i have had a few people actually comment on how "stable" it sits when towing.

Unfortunately my digital camera is not working at the moment, but i have a pic of about 18months ago. Not alot has changed other than new tyres being fitted and it has sustained some stone chips from interstate travel.

It is painted in grey hammertone, this was done so that future touch-ups or respray was easy.

This is not a cheapo trailer, i have priced these up locally with similar specs new, and was quoted from several different companies around the 5000 dollar mark (with second hand tyres and no rego).

I am looking for $3400 O.N.O. for this trailer.

If you are SERIOUS and have dollars available........Give me a call on 0402 807 417 to organise viewing etc.

Trailer located on the Gold Coast.

Please note.........URAS front bar (not pictured) DOES fit on car when on trailer

trailer%201.JPG

.

Link to comment
https://www.sau.com.au/forums/topic/165928-car-traoer/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...