Jump to content
SAU Community

Recommended Posts

there are ways around it!

i know of some people who have taken thier (r33 gts-t) power/weight fine to court, contested it and won!

and now that they have won once.... they can never be fined for it in their same car again!

....and I know of some people who make up stories to try and look cool.

To R31Nismoid and others, a case regarding the legalities of driving a R33 gtst has been contested in court, and has been proven by the defendant that the r33 is in fact, legal to drive on your P plates.

HOWEVER, this case unfortunately did not create precedent for others, but was argued (and won) with some of the following points:

a) How old the car is...

b) How damn close to the power/weight border it is

c) The fact the car is tuned for 105 octane petrol in japan, so those ""FACTORY"" figures are based on higher performance petrol... where as we have 98 octane, therefore performance level of a stock r33 gts-t brand new in japan vs performance of a stock r33 gts-t 14 years later in Australia are alot lower.

d) The cars REAL weight, tested at a weighbridge

The bloke now can get pulled over wherever and whenever and is legally aloud to drive a R33 GTST on his P plates.

Cost of lawyer: $750

Buying a new tie for court: $80

Driving your pride and joy LEGALLY: $Priceless

Edited by DjeMz
  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

That's what I was saying! you're the one saying the r33 is already illegal for a p plater so can't be made legal.

if the r33 gtst was made to have less power it would be NO LONGER OVER THE POWER TO WEIGHT LAWS.

you REALLY need to work on your comprehension skills.

as for the costs involved, they are irrelevant at the moment. we're discussing all the ways a p plater can legally drive a r33

;)

How are costs irrelevant?

I will chase it up and let you all know.

Thanks :laugh:

I wouldnt mind checking it all out. I love beating the law thats for sure :)

if you could find that case it would be awesome. id pay double that if i could drive my car legally. off the top of your head, why didnt it set a precedent? i thought any case can be used as a precedent because its up to the second judge to decide if its relevant (yr 10 legal studies talking). and how did he end up in court in the first place? before or after getting dicked?

Precedents can only be set in a higher court.

That would have been heard in the Magistrates court where that cant occur

Not necessarily, the Magistrate could have suggested the case be sent up to a higher court, however over a simple traffic related matter, I don't thing he or she would bother, nor the defendant have the time or resources (to afford a high court lawyer when he/she drives a r33 :D ) to argue much a matter.

The issue MIGHT HAVE (again still trying to chase down the facts) got sent to court after the defendant did not pay the fine and received a court summons to explain why the fine has not been paid or/and the defendant chose to take the matter to court.

Mate there's no need to be such a prick about it.

No one said anything about using sandbags. I was thinking along the lines of adding corner weights.

And for your information:

Straight from http://www.arrivealive.vic.gov.au/c_youngGLS_9b.html

Now who's wrong?

Ass is right, (AGAIN :blink:) The weight is always a factory figure, modifications only refer to increases in power, which again works against you.

Your only option is to upgrade to an r32/r31 etc :w00t:

To get a car Enginereed cost hundreds, if not thousands of dollars.

To get a car ADR Approved (EPA Etc), you can be looking at upwards of $50,000.

It is so unfeasible it is impossible.

This hurts my head. Every post just gets more and more idiotic.

Edited by Mulkers

I'm probably wrong here... but i thought the new laws didnt affect those already on their P's, they just remained on the old system? Maybe im wrong here..? I should be safe enough with my lil 32 tho..!

I'm probably wrong here... but i thought the new laws didnt affect those already on their P's, they just remained on the old system? Maybe im wrong here..? I should be safe enough with my lil 32 tho..!

http://www.skylinesaustralia.com/forums/in...p;#entry3044704

Removing the turbo doesnt constitute having a non-turbo car.

Fact of the matter is its still a R33 GTS-t by the build plate, and EPA to boot.

mkay, now had you actually read what my post was about, you would've read that it was not about making it a non-turbo car in form of registration, but lowering the power to weight ratio in order to make it legal for pre june 30th 2007 p-platers.

from the vic roads site

"If your car is modified, you may also need to obtain an engineer's certificate and do your own calculations. You are also required to notify VicRoads of any significant modification. Penalties for not doing so are tough."

go flame me again im just trying to explain how we do it for the victorians

Edited by lexi bro!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...