Jump to content
SAU Community

National Nizpro Dyno Day

KICKIN

By KICKIN,
in Events

 Share

Recommended Posts

KICKIN Community Regular

KICKIN

Posted
Posted

Hey all...

Im here on Behalf of Nizpro to let everyone here know about there NATIONAL DYNO DAY

Nizpro Turbocharging in association with Nizpro Dealers and Suppliers are holding this years first National Dyno Day.

How this works:

We will be holding 3 dyno days throughout the year. The first one being on Saturday June 16th. The dyno day will be held at Nizpro Turbocharging (Bayswater, vic) and also on the same day in NSW, WA, QLD & SA.

If you will be attending the dyno day at Nizpro (Bayswater, Vic), please read the details below, and add your name to the list in this thread.

If you will be attending the dyno day in your state, contact the appropriate Dealer/Supplier below.

Date: Saturday June 16th

Location: 6/46 Barry st Bayswater Victoria

Price: $45 for 3 runs, Includes a Printout.

Details: This dyno day is open to any vehicle make/model!

There is no horsepower limit, and Blowers etc are all welcome to be used.

There will be trophies awarded on the day.

Classes:

4 Cylinder Naturally Aspirated

4 Cylinder Forced Induction

6 Cylinder Naturally Aspirated

6 Cylinder Forced Induction

8 Cylinder Naturally Aspirated

8 Cylinder Forced Induction

There will be a BBQ and refreshments served on the day. We will also be showcasing some Nizpro kitted cars on the day.

What do you need to provide?

1. Ensure you have at least 1/2 tank of fuel, there is nothing worse than running low on fuel on a full power run.

2. All vehicles must have exhaust systems complete from front to back.

3. If you have any special requirments in relation to the way to vehicle will be run, please let us know in advance.

4. The dyno day is held for rear wheel drive cars only, with the exception of 4WD's ONLY if they you take out your front drive shaft before arriving.

Legal Terms:

Prior to placing the vehicle on the dyno, you will be giving a form to sign authorising your vehicle to be placed on the dyno.

1. You must state on that the max RPM range to take your vehicle to.

2. By placing the vehicle on the dyno, and signing this form, Nizpro does not accept any responsibility whatsoever, in any way, manner or form in relation to any Engine/Fitment damage that may occur to the vehicle or yourselves.

3. Before your run, it is expected that the vehicle is warmed up and ready to go on the dyno.

4. Remember to check that your vehicles oil and water levels are correct.

What do I do now?

Put your name in this thread if you will be attending the day (June 16th), at Nizpro Turbocharging (Bayswater, Victoria)

Remember, if you are not in Victoria and want to attend the day at another location, contact the below Dealers/Suppliers for their information!

OTHER LOCATIONS FOR DYNO DAY 16TH JUNE

NSW:

TuneHouse

11 Chandler Street

Marrickville, NSW

PH: (02) 9557 4000

WA:

Xtreme Ford Tuning

16 Runyon Rd

Midvale. WA. 6056

PH: (04) 3340 5278

QLD:

Elite Automotive

166 Beatty Road

Archerfield, QLD 4108

PH: (07) 3274 2445

SA:

KPM Motorsports

257 Goodwood Rd

Kings Park, SA

PH: (08) 8299 9998

Come one come all!

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Boost level and torque curve

      By Kinkstaah · Posted

      Because there is still an engine underneath that turbo. PSI is not a measurement of power, it's a byproduct of resistance. What would be really decent is to have a CFM gauge on the output of a turbo to see how much it's actually pushing. 21psi (as an example) is not the same amount of air at 3000rpm as it is at 7000rpm, even if the boost controller is controlling boost at "21psi". The engine is inhaling and exhaling way more air at 7000 than at 3000, even if it's less efficient.
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      don't want anything more or less, I don't really understand why the torque still goes up to 6000-6500, while the boost peak is around 4000. if it only comes from the cams or from the boost controller etc.  
    • Kinkstaah
      Boost level and torque curve

      By Kinkstaah · Posted

      I'm not sure you understand the physics of what you are asking. Can you draw on the dyno graph what you want to have happen? I'm thinking this is a functional impossibility here, unless you chose a turbo literally so laggy that torque is at max at 7000rpm and artificially choked prior to that. Power and Torque are intrinsically linked. Power is just Torque over time. What you're really seeing in the torque graph is "Power per RPM" if that makes any sense whatsoever. You still get more power at 7000rpm than 5000rpm, because it is "power per RPM" and you have more RPM. at 7000 than you do at 5000. You still feel more powerful at 7000rpm. The torque graph will influence the rate of power increase per RPM.
    • luke gtr
      Hello from the UK

      By luke gtr · Posted

      Welcome!  If possible,  would live to see some pics. How long was it away getting the work done? Hopefully it feels like a new machine.
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      yes indeed the graphic format makes a visual difference but there is on average 120nm more between 4000 and 6000rpm on the curves it is not nothing. you are right, the cams influence the torque curve. I was able to chat with one of the Hypergear tuners, he confirmed that a boost control allows you to manage the pressure after the spool. the absolute pressure (psi) on the graphics is measured where? It seems that the cams affect the maximum pressure depending on the regime but I may be wrong.   not pleasant to drive before 4000? if we spend our lives between 1000 and 3000 rpm as you say then we might as well just run diesel turbos
×
×
  • Create New...