Jump to content
SAU Community

Power Figure Issue

lows_13

By lows_13,
in Engines & Forced Induction

 Share

Recommended Posts

Fixxxer Community Regular

Fixxxer

Posted
Posted (edited)

I have the same mods as you although without a remap (although there may be a Blitz chip, never checked, never wanted to) and the car runs mega rich (so maybe not).

I made 172rwkw @ 12psi and on another dyno 188rwkw @ an unknown boost level (suppose 14psi).

Ohh and EDIT: Mine made peak power at 6500rpm and slightly trailed off from there.

I'd just say the dyno is reading a little low.

Fixxxer

Edited by Fixxxer
TTT Grand Master

TTT

Posted
Posted

193kw + 163kw = 356kw

356kw / 2 = 178

So let say that you have the average of the 2 and have about 180rwkw.

f*king dyno's

they shouldn't display power.

they should display, A:F, boost, and a power and torque curve..

but never show a number..

there are thousands of these useless threads around.

The Mafia Grand Master

The Mafia

Posted
Posted
193kw + 163kw = 356kw

356kw / 2 = 178

So let say that you have the average of the 2 and have about 180rwkw.

f*king dyno's

they shouldn't display power.

they should display, A:F, boost, and a power and torque curve..

but never show a number..

there are thousands of these useless threads around.

this couldn't be any closer to the truth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Cleaning my wheels 😍

      By PranK · Posted

      I left the ceramic coating off this bit, hopefully it just comes off after a few drives.   The gap between the spokes is too tight for anything on a stick, its only marginally bigger than my finger. I have to use a brush to get in there and its a big reason why I thought I'd try the coating.   Absolutely will do. I have EBC Blue Stuff pads to put on the front which will make them a bit dirtier. I'm hoping a pressure wash will just get most off. The shine is different to most, its very thin but seems very well 'attached' so hopefully it lasts.   
    • dyl33
      R32 gtst Center bearing (brand new)

      By dyl33 · Posted

      SOLD
    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Barrels don't need to be shiny clean. But they are certainly nicer when they are not polluted with years of brake dust, and worse the rotting corpses of the last 17 balance weight sticky pads scattered all around.
    • GTSBoy
      Use text replace function to auto-link to referred threads?

      By GTSBoy · Posted

      Yeah, type a special character like ^ or | to initiate the equivalent of the "at"ing for thread links. Although, it might not get any easier to manage. Imagine 30 or 40 threads that kinda match what you want, and the one you want is lost after a long list of useless ones. The magic keyword version I proposed would be a manual effort to set up each case. More of a directed effort from the greybeards to facilitate exposure of useful content. I'm not against the auto complete stuff being considered - maybe por que no los dos? (And where I said "triggered automatically" in my OP, I meant "triggered accidentally". Of course I want it to be automatic!!)
    • soviet_merlin
      Cleaning my wheels 😍

      By soviet_merlin · Posted

      Ah yes, fair enough! I was purely thinking about cleaning the spokes and front of the wheel with the mitt. For the barrel the rag on a stick makes more sense. I've tried cleaning the barrels on mine and gave up in frustration. Between brakes being in the way or spokes being in the way and limited space to constantly move the car front and back it was just too annoying. The barrel being as shiny as the rest of the wheel sounds amazing though. At this point I'm not even sure if they have the same surface finish on mine. But I feel inspired now to find out.
×
×
  • Create New...