Jump to content
SAU Community

Recommended Posts

Hi,

Sorry if this question has been asked 247099998 times before, but I searched everywhere and couldn't find a definite answer when it came to GT-R specifics. I'm guessing it will differ slightly from the differences between the GTS-T series'.

What is the differences between the following and how do you tell them apart easily?

  • R33 GT-R Series 1
  • R33 GT-R Series 2
  • R33 GT-R Series 3

Is it to do with the shape of the lights, bonnet, xenon lights, airbag standard/optional (driver and/or passenger), active LSD?

Thanks!

I never realised there was 3 series of the standard GTR :S i had a quick look and found this info but that's just different named GTR's Not too sure how reliable this info is either...

1995-1997 (R33)

The R33 was developed in 1995 as a successor to the venerable R32 model that Japan had gotten to know well. The engine in the R33 was nearly identical to the R32. It used the same turbochargers, and the same specification of transmission, although the syncros were made to be stronger. The base model R33 GTR weighs 1750kg.

The R33 GTR launched in January 1995 with the base model GTR and the Vspec model. The Vspec mode weighed 10kg heavier, and had sportier suspension resulting in lower ground clearance. The Vspec also featured the newer Attesa-ETS Pro all wheel drive system, which included an Active Limited Slip differential. The Vspec model also included a four wheel independant channel ABS braking system.

At the same time as the release of the R33 GTR, and GTR Vspec. Nissan released an R33 GT-R Vspec N1 model. Changes on the R33 N1 model are similar to the R32 N1 model. The car was made lighter, by removing the ABS, air conditioning, sound system, rear wiper, and the trunk carpet. The R33 GT-R Vspec N1 received the slightly revised R33 N1 engine.

A special edition R33 was released on November 3rd 1997. The car was called the 400R, with R standing for Racing. Developed with Nismo, it featured an overbored RB26DETT engine, the RBX-GT2, with polished ports, an upgraded exhaust, composite parts, and a more free flowing turbo and intercooler system. The car developed a staggering 450 Horsepower, and allowed the car a top speed of over 200mph.

Info from: http://www.answers.com/topic/nissan-skyline-gt-r

I like how the v spec gets ABS then the v spec n1 gets abs removed. why add it in the first place !

Edited by deant1
The base model R33 GTR weighs 1750kg.

Rubbish. Try Wipipedia for a better idea.

External differences for the R33 GTR are hard to seefor each series. Probably a more experiance person may be able to answer.

Saying that, many have been modded so much visual clues might be misleading.

Just found a website of another link that lets you compare cars. http://english.auto.vl.ru

The model numbers changed only in the year 1997. And from what iv read the differences are as follows:

1995 R33 GTR

6 cylinder DOHC24 valve IC twin turbo

5 speed floor shift with OD

1997 R33 GTR

Water cooling serial 6 cylinder DOHC24 valve IC twin turbo

5 speed manual

Rear fog lamp

Xenon headlight (Discharge lamp)

Apart from the obvious two, xenon lights and rear fog lamp i'm not sure if the other two i'v listed are the same but the website didn't bother listing the full specs for one of them?? Since i'm assuming they are both watercooled and i don't have a clue what 5 speed floor shift with OD is?????

Edited by deant1
  • 2 weeks later...

I have the series 3 r33 gtr

the series the comes with red stitching and inserts on the interior as well as the rear fog and xenon headlights. the gearbox is 5 speed manual without OD meaning that it is just another gear with similar ratios. So when u shift into it you are still accelerating forcefully. With the 5 speed OD ( series 1 and 2) the use of the 5th gear is for coasting/fuel economy.

I have the series 3 r33 gtr

the series the comes with red stitching and inserts on the interior as well as the rear fog and xenon headlights. the gearbox is 5 speed manual without OD meaning that it is just another gear with similar ratios. So when u shift into it you are still accelerating forcefully. With the 5 speed OD ( series 1 and 2) the use of the 5th gear is for coasting/fuel economy.

So is yours a 1997 or higher? just wondering if the website info is correct!

So is yours a 1997 or higher? just wondering if the website info is correct!

I also have a S3 gtr 33 Vspec and u get dual airbags, red stitching on seats and steering wheel, large front lip, xenons and i got a momo steering wheel as standard too :whistling: not sure wat else?

The gear ratios are the same in all 3 R33 GTRS and 5th is O/d on all, series III has improved synchros though.

Series III is the only one with red inserts in the seats ( others are blue). S III has bigger lower lip , rear foglight, an opening( cutout) on the passengers side front blinker, xenon h/lights that have a different top bracket to the other 2, GTR on the fuse cover in the engine bay and some s III have factory leather trim as well.

Series I cars have one airbag standard but some will have 2 ( was a factory option). Series I have different steering wheel to the other 2 and different dash suround ( flat ( not bubbly). Some series III had momo steering wheels .

I'm sure there are other differences that don't come to mind right now .

By the way none of them weigh anywhere near 1750 kg, depending on the spec GTR , they are all about 1500-1540 kg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
×
×
  • Create New...