Jump to content
SAU Community

Recommended Posts

i am sick of readin crap talk and people going on about using rb20 heads, what do i need for 300hp and just people bumping posts to make themselves look good

i cant seach the post on its own for info on specialist modifactations..

downloading word version (so i can seach) only does 1st 15 pages or upto 22jun03 that leaves 90% hidden

and readin the post.. takes far too long and only has 1 or 2 relevant things on each full page.. the rest is people asking stupid questions..

i suggest someone in admid makes a proper non bullsh1t detail engine build guide for various power outputs.. -500 -800hp -1000hp maybe a guide on electronical fuel and driveline. etc.. i think this would be a better non timewasting soloution

life is to short to read a post which is 90% not important or related..eapecially when 260 pages..

i have had more help from sydney kid on his own than this whole website combined!!

any suggestions on downloading whole post.. so i can search keywords or similar..

dude there is a 1000 ways to skin a cat, and 100000 ways to make those kind of horsepower levels and 10000000000 posts on here telling you how to do it and 100000000000000 different budgets. If your such a newb to power building then a thread aint gonna be much good either as there is always going to be conflicting information. Your best bet is to doa s you have done and search out which members have the "better" reputations and ask for thier oppinion.

the object of a forum is for everyone to post there oppinions is is then your job to decide which is applicable to you. I can specify a 800hp package that cost 3000 and another for 30,000..... it depends on the application/ budget/ etc

Edited by URAS

The thread is down from around 300 pages.

I am cleaning it... albeit slowly as i have other pressing things that need sorting out on the forum :action-smiley-069:

The info is there, its (as URAS said) upto you to decide how you wanna go about it.

And its not "Admins role" to make up threads that cover each persons specific needs, thats your job. To research it yourself.

Admin is just here to oversee the running of the forum for the most part.

You basically want someone ELSE to sit down and do a write-up for you, thats just lazy.

Im sorry if this doesnt sit well with you, but it isnt going to change.

I agree, it is a bit of a pain and contains some doubled up info etc but it is getting cleaned up well.

I'm glad I made myself read it all and made notes on what parts / specs people use and noted the page numbers.

You only have to read it once then keep up to date with it every few days. :action-smiley-069:

i understand what your saying dude, that page gives me the shits even though theres some very useful info on there i feel its controlled by half a dozen or so people who are using it for chit chat and other questions not specifically related to the 30 convo and when you ask a legit question the reply is more often than not "go back and read"

"i really want more power from my 32/33 what do i need to do this conversion, my buudget is 5k of fluff" GIVES ME THE SHITSSSSS!!!

on the other hand its real good to see thats its being cleaned up, which as you can imagine will take a long time.

im actually looking at the conversion, and doing it myself ( over a long period of time haha)

and out of the information i got from it was quite useful, and went from 265 pages down to 1 page of what i need to know.

good thing to do at what URAS said was to read the posts of the ppl that actually know what they are saying and what you find useful

I know you are going to be skippin quite alot of some pages and is time consuming, but the build is time consuming aswell.

Plus on the thread, ppl might state how to convert and possibly go the long way about it, go cost effective way, or be expensive as shit. Depends on how much power you want in the end.

And what parts you plan on using.

But i do get what your saying how there is alot of shit on the thread, convos that go off topic, and ppl that dont know what they want.

Take the time to read and reread and digest the information thats important to you.

By the sounds of some ppl here they expect all the info given to them on a platter, if you were serious about doing this conversion you would want all the info u can get plus some more and not start useless topics like this one... This thread should be deleted. :P

Edited by Alf

Hi GDZ1LA it's true that reading the whole thread can be hard work. However, help is easy to find. The UK GTR site that prego mentioned is outstanding and so is the link to a detailed guide that Cubes has at the end of every post, which you only need click on to download. Some people have read both and posted with questions, and those who've done this conversion are only too happy to answer. R33 Racer, Cubes, Shanef, GTR Geoff and Sydneykid have been a real help to many of us including me.

The RB30 conversion dyno thread will also give you an idea of performance but bear in mind all configurations differ for obvious reasons.

Cheers

i am sick of readin crap talk and people going on about using rb20 heads, what do i need for 300hp and just people bumping posts to make themselves look good

I 100% agree, posts like yours suck and 99% of your posts are crap like the one asking for details and specs of big skylines for your so called website, do your own homework and get over yourself as we all start somewhere even if its 300hp

How about if the forum sucks so much we ban you?

I 100% agree, posts like yours suck and 99% of your posts are crap like the one asking for details and specs of big skylines for your so called website, do your own homework and get over yourself as we all start somewhere even if its 300hp

How about if the forum sucks so much we ban you?

Yeah, what she said.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The jack pad placement always had me scratching my head. I only have a small section to work with on both the E90 and E70 (and insert new project car here ) and I could see lining it up to be a bit of a bugger. For me, the E90 is just too low and needs small ramps and then the front centre jack point is a bit tricky to line up (it's half way down the subframe and about the size of a tennis ball, its really hard to see unless your head is on the ground), so I definitely like the idea of not having to do a multi-stage jack and just sliding these bad boys in under the sides. There's only one small point at each corner, so I can't jack AND add a stand on the same corner. Or, maybe I can and I'm too nervous to try. 😟
    • Is this not the biggest deal of all? I was hoping the whole "will slide under cars with skirts etc and lift evenly quickly with minimal fuss" was the entire point of such a device? 
    • Here's Neil's car up on mine recently
    • Yeah I've got one of these, Quick Jack not Quick Lift, but your link looks like a good copy For me, it's better than no hoist, but it is definitely not as good as a hoist  It lifts the car about 60cm which is a nice working height compared to regular stands and it is only under the sills so it doesn't get in the way like regular chassis stands do.  No need to use regular stands, it has a safety lock on it. On the down side it is really heavy/unwieldy to drag into place, and you have to place it after the car is there (no option to drive the car to where the frames are. You need to try and line it up with the proper sill points which is hard as it swings up in an arc and there is surprisingly little adjustment in the distance between the rubber pads for different car lengths. Not a big deal, but in practice a jack + stands is probably quicker. Also there are hydraulic lines to each side and you need either a 240v or 12v source to power it depending on which option you have, I use 12v as I always seem to have a battery around.
    • Finally addressing my catch can and oil setup Plan is to do as much as practical without having to remove the motor or pull it apart. (no back of head to sump drain/breather or oil restrictors) First step is a set of full length baffle plates from Hypertune and a Tomei cam cap stud kit. I could probably have laser cut and bent up my own ones but this took any guess work out
×
×
  • Create New...