Tps, Ignition And Starting

[Keeper]

Hi,

Since putting the car back togeather the plugs wont spark!

injectors are working (so CAS is working)

TPS shows a error code in consult and reads full throttle all the time, the idle peddle switch is working fine though.

new plugs in, but they wont fire, neither will the old ones, i have earthed them on the car and im checking for a visual spark

when i multi-metered the ignitor pack not all channels were getting voltage,

if the TPS was reading full throttle before the disassembly would the car have flooded out non stop or would it just have run rich but regulated via the throttle body butterflies limiting the air?

i double checked the earth on the coil loom, it has no resistance from the block to the earth connector and to the ignitor earth either