Jump to content
SAU Community

GTR Work Wheels and set of 17"

FRISKI
 Share

Recommended Posts

FRISKI Mentor

FRISKI

Posted
Posted

Set of 18x10" work wheels with near new 265/45/18 Falken tyres previously on "FRISKI" (only for one or two months)

Special dish rare to find, only other car seen with same wheels is JMS red R33 gts-t

*** SOLD ***

also

A set of 3 peice light weight 17 x 7 ARJ Rims only

4 x 100 offsets

multi-spoke with yellow coour insert between each spoke

Asking $1000

PM or email [email protected]

Link to comment
https://www.sau.com.au/forums/topic/16688-gtr-work-wheels-and-set-of-17/
Share on other sites
vspec Apprentice

vspec

Posted
Posted

this is vspec send me a photo of the 18 inch work wheels. im selling some work wheels but have small dish 1 half inch dish looking for a set of work wheels with 4 inch dish on them.my wheels brand new are $52oo a set no tyres at UAS site.selling mine for $2500. thanks vspec

nissaner Mentor

nissaner

Posted
Posted

i want the pictures of ;

A set of 3 peice light weight 17 x 7 ARJ Rims only

4 x 100 offsets

multi-spoke with yellow coour insert between each spoke

Asking $1000

not the work wheels... :P too broke atm to buy those beauties...

r they too small for r33 gtr? (the 17's i mean...)

cheers

john

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • GTSBoy
      AC not coming from top vents

      By GTSBoy · Posted

      What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • dbm7
      Shifting questions

      By dbm7 · Posted

      ...oops. forgot the TCU end...
    • Sleepergm
      Custom titanium intake

      By Sleepergm · Posted

      No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...