Jump to content
SAU Community

Recommended Posts

What changes must be done to a RB26dett engine to produce 500-600 hp.(oil pump,pistons.....)?The tubos will be replaced by hks gt 2535(prefered for small lug).The car will be driven every day. Is it better to buy a rb26det engine an modify it.(cheaper?)?

I readed somewhere that r34 gtr doesn't come with oil cooler.

In my country the average temp at summers is 40 C.I think a oil cooler is needed.Do you now a website that sells one?

i'm not too sure, and people, please correct me if i'm wrong, this is just my assumption.

you will need: full exhaust, air filters, turbos (have been recommended HKS GT2530), fuel pump, injectors, most probably camshafts, aftermarket ecu, boost controller, better front mount intercooler and oil cooler.

you might need: valve springs, retainers, oil sump (if planning track work), oil pump.

also, look at engine brace, because i have been told that over 500hp, the engine twists a lot and causes a lot of problem. certain parts of the chasis might need strengthening as well, someone might know better on this topic.

i think the standard internals should see 500hp, dunno how reliably though. buying an RB26DETT and modifying it might be cheaper in that you will not have to pull the engine out to modify it, but you still have to pull out the other engine at the end of the day, so don't think it's advisable, unless you've got heaps of money lying around.

and yes oil coolers are a must for these engines. driven hard in near winter conditions, temp around 15 deg c, my engine oil heats up heaps in about 10 mins. it's just one of the problems with GTRs.

try www.takakaira.com, they have all sorts of aftermarket stuff.

you may want to consider drivetrain weaknesses as well, before rushing out and just upping the power. i think the stopping power should be sufficient, but you might want to upgrade it as well. you can never stop fast enough.

Easy :P

Pod Filters

Turbo Back Exhaust

ECU (PowerFC)

600cc+ Injectors

Big Fuel Pump

Bigger Front Mount (600x300x100-ish)

Your choice of turbos:

HKS GT2510 - 500hp

Nismo N1 Turbos - 500hp

HKS GT2530 - 550-600hp

HKS GT2540 - 600-650hp

Those are rough figures (so don't all reply saying GT2510s can make 510hp), just so you get a feel for the comparative sizing of the turbos. Any of them will get you past 500hp fairly easily... Depends how much more than 500hp you want, and how much bottom end response you're willing to give up for the extra top end power.

Recommended ancillary upgrades to handle the power:

Twin plate clutch

Oil cooler

Brake upgrade (pads, braided lines, good fluid)

So i will need

1. Full exhaust

2. Ecu (power fc seems to be the favorite,with the boost

controler)

3. 600 cc/min Injectors

4. Fuel pump(?ltr/min)

5. Intercooler(600x300x100)

6. Oil cooler

7. Twin plate clutch

8. Brake Upgrade(size ?)

9. Engine braces

10. Race catalyst

11. Air filters

I would like to know the best brand for every component in the above list aswell as prices.Anythink else i must add to the list?

Is hks gt 2530 turbos a better matche for the rb26dett than 2535?(are 2535 more lagy?). I readed that the standart gearbox can take up to 600 hp.Is this true?The same goes for the engine internals? Do i realy need a new camshaft for the hp i aim?If i do, what duracion (degree) must i get?With allmost double power than standart shout i change the size of the whells?If so what size you recoment.

  • 2 weeks later...
Guest nismo_trip

It would probably be a good idea to get some camshafts and wheels to get the full potential out of your new turbos, maybe some 264 degrees in and out, as for your engine holding together yeah it should, maybe you might want to buy a metal head gasket to lower compression if you want to be cautious

to produce(353rwkw)...all i did was got the standard t28 turbos hiflowed,780cc inj,motec,upgrade fuel pump,boost,intercool,single 75mm throttle body...but mind you i had the rb26dett fitted into my vl calais which ran a 10.8 @ 127 on 20 psi...

www.axg.net/gg/ct/movies/omy11s.mpeg

Originally posted by The Dog

How long will the engine hold tougether?As i said the car will be driven exery day.

in my r34,i have

trust t517z turbos

power fc

660cc injectors

bosch 044 fuel pump

trust oil cooler

hks hiper exhaust

trust cam gears

im around 600hp.

dont bother with headgaskets or headbolts or even camshafts.

im even running standard cooler.

if ur chasing 350kw+at the wheels,u may need intercooler,but if ur aim is 300kw+ approx ,above is all thats required.

there is a heap more u can do,but unless your spending time at the track,theres no real point.

u can throw an extra $10k at it,may be more durable,wont go any faster.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not yet, might end up being easter now, didn't end up getting time off over xmas.    I've been seeing some concerning things online now too. Lots of people with issues, could all be setup issues but the consequences in some cases are significant.    All of the below are other peoples stories, not mine and are unverified.  Seen 2 x broken adapter ring that destroyed the gearbox as it failed.   They still do seem to have twin plate rattle despite claims of silent. Several issues with it not holding power but some evidence of constant pressure on plate. Setup issues with bite point.   Lot of people after 2-4 weeks swapping back to another brand.    On the positive side, I've seen a barra put down near 1000hp at the wheels and its held it.  Also everyone seems to confirm the pedal is light.    Does have me a little cautious and looking at ATS carbon clutches again .......        
    • I'm late to the party on this one but good to see common sense has prevailed and the turbo kit is coming. 
    • She's looking good Greg. Colour suits it perfectly 👍
    • I had a look at the FAB9 EFR kit, around $8500 AU before delivery, so add in shipping, installation, consumables and tuning, I believe the price difference would be negligible  And whilst I am paying top dollar at MX5 Mania, if I have any issues with the kit they are local for support,  and from my experience, will happily go out of their way to help, hell, I've purchased parts from them and asked "how do I install or remove parts" and they have fitted a few of them for free, this means more to me than saving a few thousand dollars And yes, 99% of the time I just plod around in the car, that may change once I start hearing turbo whooshy noises, but, as I have 3 family members is the constabulary, even when I'm up it, it is only up to the speed limit, or occasionally, but rarely, overtaking on the Hwy (I just plod in the left lane typically and enjoy the drive) Plus the kids would never let it go if I got booked speeding, Jackie is constantly getting critiqued by the kids about her driving, which I think is hilarious, and tell them that she is "bringing shame to our family", so heaven forbid if I ever got done speeding, after all my mouthing off about her driving, I would never live it down, and it would be another thing she would bring up any chance she got Like the time I got drunk about 15 years ago and fell out of a cab, which gets brought up at least a few times every year since it happened Good times
×
×
  • Create New...