Jump to content
SAU Community

Recommended Posts

  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

mine cost me $400 plus the $300 worth of 600HP fuel pump (cost me $200 actually).

NOS and others do kits for around $1500 for a (wet). Leave the dry kits well alone. 100HP shot on top of a stock turbo R33. The install is easy the only special tool you will need is a tap and die kit ($20 from hardware store) but, often the kit comes with the suitable tap anyway.

Nitrous is the best value mod bar none. You only need a fuel pump change. No ecu, intercooler blah blah blah...

Originally posted by rev210

mine cost me $400 plus the $300 worth of 600HP fuel pump (cost me $200 actually).

NOS and others do kits for around $1500 for a (wet). Leave the dry kits well alone. 100HP shot on top of a stock turbo R33. The install is easy the only special tool you will need is a tap and die kit ($20 from hardware store) but, often the kit comes with the suitable tap anyway.

Nitrous is the best value mod bar none. You only need a fuel pump change. No ecu, intercooler blah blah blah...

Im pretty sure Dry is better than Wet (or maybe its the other way around)

for $1500 u can get a Pro Fogger NOS System 500hp+

why just go 4 100 when u can go 4 500 ;) (bigger is always better)

Guest INASNT
Originally posted by Soulja

Im pretty sure Dry is better than Wet (or maybe its the other way around)

for $1500 u can get a Pro Fogger NOS System 500hp+

why just go 4 100 when u can go 4 500 ;) (bigger is always better)

coz if he went 500 shot he would be walking to work coz his engine would blow itself to bits in a matter of seconds :)

Originally posted by Soulja

Im pretty sure Dry is better than Wet (or maybe its the other way around)

for $1500 u can get a Pro Fogger NOS System 500hp+

why just go 4 100 when u can go 4 500 ;) (bigger is always better)

Not when the motor will only handle 450-500hp. :)

So far my Nitrous install is pretty undetectable under bonnet. You can't see the solenoids and the braided lines are covered with good old pollution hose. As they say 'nothing to see here'.

As for the bottle: 'that subwoofer box is rather interesting.....'

I think I would go for the dummy setup my self.

I'd rather have a few bones laying around so if I were to get pulled over they would run off with the bones happily.

Then you could make it look really nice under the bonnet and be confident that all is 'legal'

Why wouldn't they?

If you use it for the drags... Get a slip handy in the glovebox presto.. A lot riskier with it hidden.

I havn't been pulled over for some time but when I do they know what they are looking for. There not that 'dumb' well the ones i've run in to arn't.

Well Rev, I have been trying to resist commenting, but I just can't. You sold out!!!! What happened to the standard turbo for 12's guy? I'm laughing and it's not from sniffing NOS. Your gunna add some nitrogen and oxygen from the dentist to make the car go faster for phissssst, that long. Do it three times and you can't do it anymore, 'till you go back to the dentist for a refill of the baby's bottle.

Shoot why don't you just take the turbo off and the intercooler and just run some more NOS? Then you could claim 11's without any turbo at all, let alone a standard one. Crikey why not sell the RB25DET and buy a RB25DE? Just add some more giggle juice, it'll be faster.

OHH! I've got a great idea, why don't you take the engine out completely and just squirt some laughing gas into the exhaust pipe and light it? Jet car man, did a 10 with no efn engine at all.

Sorry, I can hardly control myself with the laughing, I'm either gunna break a rib or pee myself. Gotta stop now.............

I don't count on dumb cops. Thats why my setup is so well hidden.

Been around cars with hidden nitrous for some time. The best strategy with a 'sleeper' is to not draw any attention to yourself in the first place (that suits the law fine because you are also unlikely to be doing illegal things on the public roads). Having a 'fake' nitrous kit is like a red flag to a bull. It may not actually work (the cops are unlikely to test this) but, you will cop a sticker for something else in the best case senario.

sydneykid,

I'm still going to get the 12 without the nitrous. But it was just too cheap to pass up. And nitrous is alot of fun. Nothing like the torque it brings instantly.C'mon for $400 would you say no?

BTW, did you know I've got a worked V8 powered volvo wagon as a family car? Complete with two baby seats and a pram. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...