Jump to content
SAU Community

How To Spot A K&n Filter

made_guy

By made_guy,
in General Maintenance

 Share

Recommended Posts

made_guy Experienced

made_guy

Posted
Posted (edited)

noobie question -

looking at pics of K&N Panel Filters, they appear the same as the cheap paper filters (i.e. salmon coloured).....

Now I have a salmon-coloured filter that i think is a cheap paper filter (no part # or brand on the filter itself) in my new ride and am thinking about a K&N panel, but the pics of K&N's 'look' like the filter I have.

Can you see/feel the difference in material or branding on the K&N's?

Edited by made_guy
Link to comment
https://www.sau.com.au/forums/topic/167218-how-to-spot-a-kn-filter/
Share on other sites
95SKY Community Regular

95SKY

Posted
Posted (edited)

K&N are still really good, Million km warranty and they flow very good with pods or panel... they look nothing like a paper filter at all, they have like a metal mesh sorta thing or it mite be plastic ?thats how you could probably tell the difference.

Edited by 95SKY
Onthehunt Veteran

Onthehunt

Posted
Posted

i have had both apexi and k&n and couldnt tell difference between them...its not a difference you can feel i think. i would have kept stock airbox but had to go to pod after getting front mount and now have an airbox and brand new apexi filter just sitting in garage(waste of money) although i wish i could go back to airbox as im getting sick of the constant noise from a pod

made_guy Experienced

made_guy

Posted
  • Author
Posted
...have an airbox and brand new apexi filter just sitting in garage(waste of money) although i wish i could go back to airbox as im getting sick of the constant noise from a pod

so you're saying you want to sell me your apexi panel right??? :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      49719 is the cooler loop. Right at the front, LHS of that diagram. Return line from rack (LP side) goes to cooler loop on RHS front of car, then back under engine and returns to bottom of tank. 49717M is feed from tank to pump. HP line out of pump is thick rubber, followed by the hard line that runs down to crossmember and runs in parallel (but opposite flow direction) to the LP return line. Nothing goes anywhere near the firewall or interior of car. The closest they get to that is the connections on the rack.
    • drifter17a
      R34 power steering

      By drifter17a · Posted

      Thanks, plan is to drain all fluid tomorrow and do smoke test to find out the leak.   Appreciate your help and want to understand how the system work. So cooling is achieved by the long loop not any rad? The diagram seems to suggest it connects to somewhere inside the cabin and I thought that is a cooler inside firewall. If you look at the diagram it seems to show it connects to something inside firewall. I tried chasing it but not easy unless I take loads off   i am confident pump is good as fluid goes in and it gets soft( steering) but as soon as I turn engine off , loads of bubble come to surface and overflow. When engine is on , fluid level is below minimum but when off it shoots off and thinking it is sucking air in. I suspect aluminium pipe may have a crack line or whole   smoke test with no fluid should be a good start and if needed will remove the pump   In addition, the one going under the engine bay is high pressure line and one directly connecting from pump to resorvoir is return/ low pressure?   finally I searched and suggestion is to use dexron 2 but that is discontinued so bought dexron 3 as all research suggest it is compatible and shouldn’t cause any issues/ blow seals. I bought two liter of dexron 3 motul atf
    • GTSBoy
      RB25 S2 Idles but doesn't want to rev

      By GTSBoy · Posted

      Don't worry about. Just don't try to drive hard enough to make boost and you'll be fine.
    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      Yes. This has already been said. It is a loop of hardline in front of the radiator. Because.... the pump is on the LHS and the steering rack hydraulic connections are where they always are on a RHD steering rack....on the RHS. The high pressure line goes down under the engine, along the crossmember, like it does on all Skylines. Don't just throw expensive braided hoses/other kits at it. Work out what is wrong and fix that.
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Still got the afm on the intake, clamps are shut tight, only loose hose is the one that goes from the j pipe towards the IACV, since it's next to impossible to find a factory hose and the barbs are different sizes (I'm still using clamps on this hose to try and help it seal on the iacv side) I've ordered parts to make up the hotside of the intercooler pipes, I'll plumb it in and see what happens in a few days I suppose The turbo's internally gated, can I just unscrew the tension rod to let the gate open?
×
×
  • Create New...