Jump to content
SAU Community

Recommended Posts

  • Replies 240
  • Created
  • Last Reply

Top Posters In This Topic

That's what I built the site in my signature for. It's not 100% accurate but it gives an indication of the differences in response and top end. I already uploaded my tuning graph from a few weeks ago so it would be good to see yours, MII32 (I think? sorry I didn't catch your name) and mine.

I haven't taken photos of my dyno graph yet, my camera's stuffed so have to borrow a cam from my mate first. I will have a look at the site u built on dyno graphing comparison~~ MII32? LoL i only have normal plates mate, name's Jyo, with the white gtr32.

I haven't taken photos of my dyno graph yet, my camera's stuffed so have to borrow a cam from my mate first. I will have a look at the site u built on dyno graphing comparison~~ MII32? LoL i only have normal plates mate, name's Jyo, with the white gtr32.

Yeah, I know, I meant you, me and MII32 but I didn't catch his name. When Mark put his graph over mine the curves were very similar except mine came on earlier. Would be interesting to see all three.

Icic willo...no wonder i was a lil confused when i thought u didnt know who i was~~ :whistling: I think the "MII32" u r referring to is "DT GTR"(SA plate). That's Danh, his forumname here is 9krpm. Yeah it would be interesting to put all the curves with different twin setups together. That said, u guys whipped me by 40hp @ 4 wheels! I think i need to move on from poncams to procams, have a re-tune and get 6/4 brakes. LoL. But awesome results on yer 2530s mate~

Icic willo...no wonder i was a lil confused when i thought u didnt know who i was~~ :whistling: I think the "MII32" u r referring to is "DT GTR"(SA plate). That's Danh, his forumname here is 9krpm. Yeah it would be interesting to put all the curves with different twin setups together. That said, u guys whipped me by 40hp @ 4 wheels! I think i need to move on from poncams to procams, have a re-tune and get 6/4 brakes. LoL. But awesome results on yer 2530s mate~

That's the one. Saw the back end of too many cars on Saturday, they all start looking the same.

You're also running N1s so you'd expect to have less top end. I'd imagine your's would come in a lot sooner though. The problem a dyno day is you always come away wanting more. While I'm more than impressed with the 2530s so far some more aggressive cams and another 500-600 rpm to play with would be nice.

Yeah, I know, I meant you, me and MII32 but I didn't catch his name. When Mark put his graph over mine the curves were very similar except mine came on earlier. Would be interesting to see all three.

It was very interesting to see that too. Thanks Mark & Willo.

Your car setup is very nice!!!! What cam, pistons, rods and gearbox have you got in that beast?

I like ur midrange response. I am thinking of selling my engine and build a 2.8 late next year for track work.

Jyo curve has less power than mine at the bottom end as well but he is running more conservative boost compare to us. It's a shame that he is selling the car though. Hopefully it will go to a good home and we get to see it out on the track as often

It was very interesting to see that too. Thanks Mark & Willo.

Your car setup is very nice!!!! What cam, pistons, rods and gearbox have you got in that beast?

I like ur midrange response. I am thinking of selling my engine and build a 2.8 late next year for track work.

Jyo curve has less power than mine at the bottom end as well but he is running more conservative boost compare to us. It's a shame that he is selling the car though. Hopefully it will go to a good home and we get to see it out on the track as often

HKS 264/9.15

CP Pistons 86.5

Crower rods

Standard BNR34 gearbox

I figure if Mark can squeeze 1100+hp out of a RB26 and I was already happy with the response of the 2530s I didn't need to go to the expense of a stroker. I think some bigger cams are in order though so I can lift the rev limit to around 8500rpm and hopefully squeeze some more out of the setup.

Nice work willo. how much boost are you running to get that power?

I've got the same cams and have been reving to 8.5krpm without any problem in the past 2 years. A larger cams might be good for the drag strip but may result in too much lag for the circuit, if not tuned properly. More power in the midrange will help me more on the track.

Nice work willo. how much boost are you running to get that power?

I've got the same cams and have been reving to 8.5krpm without any problem in the past 2 years. A larger cams might be good for the drag strip but may result in too much lag for the circuit, if not tuned properly. More power in the midrange will help me more on the track.

The 500hp run was at 20psi. All the head work done is good for 9000rpm but peak power comes on just before 8000rpm so there wasn't much point pushing it any further.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Big single, and seqy. #sorted
    • The R32 suffers from an instrument binnacle that is uncomfortably close to the design of a VN Commodore's. But beyond that, the layout of the rest of everything, and the materials (ie the vinyl coverings on dash, armrest, etc) are acceptable, and the patterns on the fabrics are not as blergh as those in the R33. And R33 seats are....quite unattractive. I know it's only small details there, but I reckon the R33 got worse than the 32. But the big blergh is the overall shape of the dash on the R33. It's just has that whole Maxima/Pulsar sort of look to it. Nothing special at all. Generic Nissan sedan. Whereas, at least the R32 dash/binnacle was different. Less a wide expanse of boringly curved plastic. More a "cockpit" sort of look, even if nowhere near to the degree that the A90 Supras got. R34 seats look good on their own, until you realise that they are indistinguishable from the shape and fabric on 70 other Japanese cars. And the foam bolsters on them suffer even worse than the earlier cars. Other than that I don't really have an opinion the rest of the R34 interior. I took the bits of the R34 I wanted (brakes and engine) and added them to the best external appearance Skyline in the modern era (the 32). So nyerr!
    • Can I be your first customer? I would like hard lines done for the fuel system, 8AN up and 8AN back and the underside wire wheeled and coated (brush or sprayed) with that black tar shit.
    • Speak for yourself, I love the R33 interior. 32 is blergh. I like the 34 interior too. Then you start getting much newer in most cars and they all turn back to blergh. 馃槢
    • 500-600hp into a RB is already 'sinking endless amounts of money' into an engine. Especially a 30 year old engine. Unfortunately this is the RB Game. Considering stock power (or at least stock components) will do ~360whp on 98 by simply turning up the boost on the stock gear on a RB26, that would be where I'd say the cutoff point for "sinking endless amounts of money into the engine" Cause to even do this reliably you'd probably need to replace all the bits anyway cause they're old, starting your sinking journey anyway. I reckon the least painful way is rebuilding the engine to make 50hp over stock lol. The 'plan your ownership around a rebuild' was a common saying 15 years ago.
  • Create New...