Jump to content
SAU Community

Recommended Posts

I've been using it for a while now, I like it.

its great.. i do a mixture of city country and freeway driving, country is a pain due to roundabouts everywhere and lots of changes in the speed limit

just changed o2 sensor, reset ecu and done my first tank since using shell 98 and dropped from 14.82/100 to 12.91/100

this whole tank was using the power button also, nice driving a few heavy moments here and there as its just too tempting but overall a gentle drive.

was having issues with stuttering at 80/100kph and more so in normal driving mode hence using the power button it seemed to clear it for some reason so see how we go with a tank on normal mode :)

That's interesting with the united 100, to bad there aren't any near me to try it.

On my first tank after getting my RS4S i got 12.6l/100kms. running BP 98. 50/50 driving and being a new car i was boosting it quite a bit. should get it pretty close to 10l with sensible driving.

thats interestinga and worth a look, whats the difference in price from shell to united 100?

I can't remember off the top of my head.

It works our to about 16l/100 on 98 and 14 on 100. So not great either way, but there is a definite improvement on 100 for me.

  • 3 weeks later...

i put in 45ltr of BP ultimate,

30km to work, half on the expressway half in traffic.

i usually get 400k out of it.

i recon i need new coilpacks and a tune then see where we end up

RS4-S sII

Gulf western Synx-6000 in and all diff oils changed (still need to do gearbox but the filler is too tight)

Seems to have helped the economy a little bit

10.5ish l/100 which is really good for down here in tassie (about 1% flat roads)

  • 1 month later...

just replaced the tired coilpacks with brand new splitfires and a brand new oxi sensor, interested to fill her up and see if i have improvement, definatly an improvement on reving her out so far :D

Drove to landsborough today and got 9.0 - 9.7 km/ltr highway. Tried to keep it off boost as much as possible. Was at about -4.3 - -0.8 vacuum most of the way

Get your calculator (or phone) out and convert that to litres/100km
  • 5 months later...

After fitment of the following to my M35

1. Power intake duct

2. Fujitsubo legalis cat back exhaust

3. Scotty stainless dump pipe

On a recent trip I got 7.6L/100k. That was cruising down the Princes from Melbs to Bairnsdale (possibly with tail wind!)

I was running United 100.

Awesome! Had to re-do the calcs a couple of times!

I've done similar economy on highway trips (down to apollo bay for example), not giving it the berries and taking it easy.

Hey guys, I have had a bit of a search but I'm just wandering what size is a stock Stagea S2 Fuel tank?

I think my economy is crap, I've been using premium 98 and while i haven't tested from full to nearly empty I've done 150km and my fuel gauge has dropped half? (would calculate but don't know tank size)

Does this seem out of the ordinary for an S2 in normal suburban conditions?

Fill up the tank till the pump clicks, reset trip meter, drive until most of the tank is gone, then refill. Take note of the distance and the litres consumed. The fuel gauge is useless for calculating economy.

Fuel tank is 68 litres, but youll never get close to emptying it. Nor should you since the pump can get uncovered leaving you with a car that wont start.

Hey guys, I have had a bit of a search but I'm just wandering what size is a stock Stagea S2 Fuel tank?

I think my economy is crap, I've been using premium 98 and while i haven't tested from full to nearly empty I've done 150km and my fuel gauge has dropped half? (would calculate but don't know tank size)

Does this seem out of the ordinary for an S2 in normal suburban conditions?

For example Im finding that when I fill up my "empty" tank, there is still consistently ~15 litres left, if the tank is 68 litres. Big margin for error.

I have put 63 or 65 litres in.

Live on the edge!

I left my car parked on a slope to the left once when the tank was low but not what Id call "empty" low. The damn thing wouldn't start till I rolled it onto flat ground. I think the fuel pump would be living on the edge (or slowly heating itself to death).

I had that happen once. Had probably 1/8th of a tank left....parked in my usual spot and the friggin' thing wouldn't start. Wrst still it was nosed into a spat where I had to reverse back up a hill to get out....had to jump on the bike and go get a jerry of fuel. Very annoying.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m thinking that’s the route I’ll  go, thanks for the input!
    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
×
×
  • Create New...