Jump to content
SAU Community

Recommended Posts

I've been using it for a while now, I like it.

its great.. i do a mixture of city country and freeway driving, country is a pain due to roundabouts everywhere and lots of changes in the speed limit

just changed o2 sensor, reset ecu and done my first tank since using shell 98 and dropped from 14.82/100 to 12.91/100

this whole tank was using the power button also, nice driving a few heavy moments here and there as its just too tempting but overall a gentle drive.

was having issues with stuttering at 80/100kph and more so in normal driving mode hence using the power button it seemed to clear it for some reason so see how we go with a tank on normal mode :)

That's interesting with the united 100, to bad there aren't any near me to try it.

On my first tank after getting my RS4S i got 12.6l/100kms. running BP 98. 50/50 driving and being a new car i was boosting it quite a bit. should get it pretty close to 10l with sensible driving.

thats interestinga and worth a look, whats the difference in price from shell to united 100?

I can't remember off the top of my head.

It works our to about 16l/100 on 98 and 14 on 100. So not great either way, but there is a definite improvement on 100 for me.

  • 3 weeks later...

i put in 45ltr of BP ultimate,

30km to work, half on the expressway half in traffic.

i usually get 400k out of it.

i recon i need new coilpacks and a tune then see where we end up

RS4-S sII

Gulf western Synx-6000 in and all diff oils changed (still need to do gearbox but the filler is too tight)

Seems to have helped the economy a little bit

10.5ish l/100 which is really good for down here in tassie (about 1% flat roads)

  • 1 month later...

just replaced the tired coilpacks with brand new splitfires and a brand new oxi sensor, interested to fill her up and see if i have improvement, definatly an improvement on reving her out so far :D

Drove to landsborough today and got 9.0 - 9.7 km/ltr highway. Tried to keep it off boost as much as possible. Was at about -4.3 - -0.8 vacuum most of the way

Get your calculator (or phone) out and convert that to litres/100km
  • 5 months later...

After fitment of the following to my M35

1. Power intake duct

2. Fujitsubo legalis cat back exhaust

3. Scotty stainless dump pipe

On a recent trip I got 7.6L/100k. That was cruising down the Princes from Melbs to Bairnsdale (possibly with tail wind!)

I was running United 100.

Awesome! Had to re-do the calcs a couple of times!

I've done similar economy on highway trips (down to apollo bay for example), not giving it the berries and taking it easy.

Hey guys, I have had a bit of a search but I'm just wandering what size is a stock Stagea S2 Fuel tank?

I think my economy is crap, I've been using premium 98 and while i haven't tested from full to nearly empty I've done 150km and my fuel gauge has dropped half? (would calculate but don't know tank size)

Does this seem out of the ordinary for an S2 in normal suburban conditions?

Fill up the tank till the pump clicks, reset trip meter, drive until most of the tank is gone, then refill. Take note of the distance and the litres consumed. The fuel gauge is useless for calculating economy.

Fuel tank is 68 litres, but youll never get close to emptying it. Nor should you since the pump can get uncovered leaving you with a car that wont start.

Hey guys, I have had a bit of a search but I'm just wandering what size is a stock Stagea S2 Fuel tank?

I think my economy is crap, I've been using premium 98 and while i haven't tested from full to nearly empty I've done 150km and my fuel gauge has dropped half? (would calculate but don't know tank size)

Does this seem out of the ordinary for an S2 in normal suburban conditions?

For example Im finding that when I fill up my "empty" tank, there is still consistently ~15 litres left, if the tank is 68 litres. Big margin for error.

I have put 63 or 65 litres in.

Live on the edge!

I left my car parked on a slope to the left once when the tank was low but not what Id call "empty" low. The damn thing wouldn't start till I rolled it onto flat ground. I think the fuel pump would be living on the edge (or slowly heating itself to death).

I had that happen once. Had probably 1/8th of a tank left....parked in my usual spot and the friggin' thing wouldn't start. Wrst still it was nosed into a spat where I had to reverse back up a hill to get out....had to jump on the bike and go get a jerry of fuel. Very annoying.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...