Jump to content
SAU Community

Watch Out When Getting Your Car Rego'ed

drodi

By drodi,
in Victoria

 Share

Recommended Posts

drodi Contributor

drodi

Posted
Posted

today i was so happy to get my 32 on the road. i got to vic roads and everything was cool paperwork checked out until the inspector oppend my bonnet had the road worthy in his hand cheaking to see if all the engine numbers checked out and the dickhead who gave me a road worthy cert wrote down the engine number but misstake a 3 for a c the cock head of a inspector wouldn't even change the misstake. he told me to get another road worthy cert and wrote void all over it and made a booking for next tues. next time you get a car registed or in your name when you by a car make sure the engine number is right so it dosent cause hassles

Rekin Grand Master

Rekin

Posted
Posted

ouch which vicroads was that?

Had similar story at burwood,

Didnt rego the car because the tyre brand on the rwc was different to the ones i had on!!1

Car was complianced/rwc'd with standard r32 wheels although sale included aftermarket rims so drove to vicroads with them...

Luckily he told me to take it back, get wheels swapped over and come back in 15mins.

Came back and didnt even check the brand of tyres just said yep lol

Taxi33 Community Regular

Taxi33

Posted
Posted

I had the same problem once, one tyer on the complience sheet didn't match the one of the car...

The complience people made a mistake on as they wrote 230 or somthing -_-

Straight away i rang the complience people and made them get another one ready, as i had to go

pick up another sheet because vic roads wouldnt accept a fax too them from the complience place!

Got it regod the same day!

khunjeng Veteran

khunjeng

Posted
Posted
Just take it back to the guy that did the RWC and show him the mistake. Im sure he'd write up another one then and there without charge.

...i hardly see how this is VicRoads fault. :thumbsup:

the point is that its a hassle for an obvious mistake by some1 else who should know better. Now he has to wait another week which sux.

GTR_STEALTH Proficient

GTR_STEALTH

Posted
Posted
the point is that its a hassle for an obvious mistake by some1 else who should know better. Now he has to wait another week which sux.

Yer it sux...but how is it VicRoads fault?

They have a job to do, and if someone doesnt provide them with the correct information/paperwork why should they put their ass on the line for someone else?

LoL @ waiting another week. BooHoo :thumbsup:

DMNGTR Rookie

DMNGTR

Posted
Posted

hey guys.. just on that note with the registering ur car.. ive got a r32 gtr but is abit of a show car also.. at the moment its unregistered and im in the stage where im about to get it ready to start driving around however i need to get it registered! now if ive got a fiberglass dash with tachos siting in it and also its got airbag suspension.. if i do somehow get a roadworthy cert for my car and do go to vic roads to do the insp (which i am told all they check is the actual id of the car as the inspectors themselves are not licenced road worthy inspectors) do u think i will have much trouble as in them asking questions about those mods, like would they check for them and actually like perform an audit on that mechanics road worthy? thanks guys would appreciate some input on this :thumbsup:

jake33 Experienced

jake33

Posted
Posted
ive got a r32 gtr but is abit of a show car also.. ive got a fiberglass dash with tachos siting in it and also its got airbag suspension..

i cant answer your question sorry but damn a 32 gtr with bags!! can you post pics??

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
It's good to see someone at VicRoads is doing what they're paid for.

Agreed.

Sorry drodi, you've got nothing. Thats correct procedure.

Its like any form of paperwork. If its not filled out correctly, its deemed to be invalid.

Thats life, move on

DMNGTR Rookie

DMNGTR

Posted
Posted
i cant answer your question sorry but damn a 32 gtr with bags!! can you post pics??

my engines still at the mechanics so at the moment its kinda sitting on the ground! when its finished in the next month or two you'll see it on the road.. and yeah pics will be posted soon - give me a couple weeks! ------ dredding vic roads day tho! ;P

Gazee Grand Master

Gazee

Posted
Posted
Agreed.

Sorry drodi, you've got nothing. Thats correct procedure.

Its like any form of paperwork. If its not filled out correctly, its deemed to be invalid.

Thats life, move on

truth hurts... but he's right.. as much as they seem like pricks thats their job..

same as getting a parking fine... can't shoot the messenger

Rekin Grand Master

Rekin

Posted
Posted
burwood guys but the guy was a real dick about it

was your inspector a fat old grumpy guy?

As i returned back to my compliancer/seller he told me he has had plenty of troubles with him haha. Something about when they import a new car, they need a vicroads person to inspect it before they can import more or something. Not too sure on the laws lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shoota_77
      Car Rotisserie

      By Shoota_77 · Posted

      Ha ha, all good! I've almost caved in and realised I'm buying one.  I know myself well enough by now that I will start chasing ADHD butterflies half way through building it and not finish it so I'm better off spending the extra money buying one instead of making one just so I can get into straight away.  I would very much enjoy making one as fabrication is probably a strength and definitely a passion but I don't want that to be at the detriment to the car I'm ultimately building it for! There's some pretty good ones around for ~$1100 at the moment so I think I'll just go that way.  At the end I sell it or as mentioned, get another project to make further use of it! Thanks gents.  
    • Skip33
      Series 2 R33 GTS25T?

      By Skip33 · Posted

      That link was very helpful thank you.
    • joshuaho96
      Series 2 R33 GTS25T?

      By joshuaho96 · Posted

      That is the option code, not the VIN. Regardless all of that production is considered series 2: https://gtr-registry.com/en-ecr33-vin-table.php
    • The Bogan
      Car Rotisserie

      By The Bogan · Posted

      Apologies if I sounded like a arse My point was that you will not be able to buy a rotisserie that suits your car, you get the rotisserie frame, and then fabricate parts to mount the rotisserie frame to the body The rotisserie side is easy, but the fabrication of the actual mounts is the tricky part, where to mount so you don't bend/twist the body, plus the geometry involved to get it to turn  If your capable at fabrication, and can work out where the C/L is in relation to the weight is so it actually can turn, you should be sweet I would love to see the progress on this just for the thought processes and fabrication   
    • Skip33
      Series 2 R33 GTS25T?

      By Skip33 · Posted

      GGKBRTFR33VDA-ALCA
×
×
  • Create New...