Jump to content
SAU Community

Recommended Posts

heading back from a west cruise lastnight, my front right bank blew.. had a proper look today to see i need a wheel alignment bad!

in the end, ive decided to get 2 new front tyres for my 17 inch advan rims..

where in the east can i go to get an alignment and 2 x new tyres cheap? i dont want el cheapo tyres, i want the good shit. im currently riding on Bridgestone potenza's..

any recommendations?

Link to comment
https://www.sau.com.au/forums/topic/168121-dang-need-new-tyres/
Share on other sites

heading back from a west cruise lastnight, my front right bank blew.. had a proper look today to see i need a wheel alignment bad!

in the end, ive decided to get 2 new front tyres for my 17 inch advan rims..

where in the east can i go to get an alignment and 2 x new tyres cheap? i dont want el cheapo tyres, i want the good shit. im currently riding on Bridgestone potenza's..

any recommendations?

I go to Total Tyres in Oakleigh - 8564 1166, they have always been cheaper than anyone else when I ring around for prices. If there's somewhere better in the area post it up for all to see.

Edited by Fry_33

I have Bridgestone Potenza S03's at the moment which are awesome but at over $320 a corner, I'm not replacing them with the same again.

This time I am going for Firenza's which are on recommendation from Techsport (Evo tuners) as the owner runs them on his race car. Currently the distributer is undertaking some agressive penetration marketing and they are (for my 17" rims from him), just under $200 a corner. They seem to have a good rep with him and are something to with Bridgestone or Federal, I forget which.

thanks for the help guys :D

i had a SAU member sell me acouple of decent low profiles.. should do for the time being.. when i have a cash hike, which should be in a few weeks, ill tear em up and go get potenza's again i reckon

Josh

I'm also running the RS2's on my gtr, and must say they really do have a lot of grip, awesome on the street, and very progressive near the limit.

got them for 250 a corner, for 245 17inch at tyre power in glenwaverly, after ringing around, I found their prices to pretty much be the lowest for most brands, have to recommend them!

I have Bridgestone Potenza S03's at the moment which are awesome but at over $320 a corner, I'm not replacing them with the same again.

This time I am going for Firenza's which are on recommendation from Techsport (Evo tuners) as the owner runs them on his race car. Currently the distributer is undertaking some agressive penetration marketing and they are (for my 17" rims from him), just under $200 a corner. They seem to have a good rep with him and are something to with Bridgestone or Federal, I forget which.

Mate, don't go for the Firenza's. They told me they were great when I got new 18" and I paid extra for them but they were a death trap. Good in the dry, but as soon as it got wet they would spin everywhere, especially say doing a U turn from the lights. Whenever you put a bit of lock on, no matter how slow you were going, and I mean literally crawling around a corner from the lights they would spin and slide. The car was basically undriveable in the wet while accelerating, and on cornering it felt like the tyres were really squirmy on the rims. The car is only 160rwkw too.

I just put a pair of Pirelli Dragons on my 17" rims on the front and they are great, cost me $265 each. I run Toyo T1-S on the back and they are easily the best tyres I have ever driven on, wet or dry. Grip is unreal! I got them a few years ago though and they cost me $350 a corner, but I think the T1-Rs which replaced them are cheaper now?

Cheers,

Nick

Mate, don't go for the Firenza's. They told me they were great when I got new 18" and I paid extra for them but they were a death trap. Good in the dry, but as soon as it got wet they would spin everywhere, especially say doing a U turn from the lights. Whenever you put a bit of lock on, no matter how slow you were going, and I mean literally crawling around a corner from the lights they would spin and slide. The car was basically undriveable in the wet while accelerating, and on cornering it felt like the tyres were really squirmy on the rims. The car is only 160rwkw too.

I just put a pair of Pirelli Dragons on my 17" rims on the front and they are great, cost me $265 each. I run Toyo T1-S on the back and they are easily the best tyres I have ever driven on, wet or dry. Grip is unreal! I got them a few years ago though and they cost me $350 a corner, but I think the T1-Rs which replaced them are cheaper now?

Cheers,

Nick

Too late, Firenzas were put on yesterday! Opinions so far (have only driven in the wet), they seem very good. I havent booted it yet as I just want to get used to having tread again but so far they seem good. Will give another update in a month once I have some more km's on them.

Appreciate the feedback though. :dry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Since this is the page where i found myself while searching for wheel fitment, i will add the ones im looking to replace too. Fenders arent rolled, so in big bumps they touch the tire (tires could be narrower). no any adjustable arms, so the camper is what it is (dont know). Wheels: 5ZIGEN Fireball Front: 18x9.5 ET12 - 245/40 Rear: 18x10.5 ET25 - 285/35
    • That’s a beautiful setup Tao, Have u done any development with the new Turbosmart 40mm electronic straight gate, especially in this G30 configuration?
    • Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
×
×
  • Create New...