Jump to content
SAU Community

R33 gearbox

<<<aZn_RoMeO>>>
 Share

Recommended Posts

dabigbolf Proficient

dabigbolf

Posted
Posted

with the rb boxes. the vl turbo 5 speed and r33 manual turbo are the strongests. much bigger, and weigh a heap more.

Rb20det, vl non turbo, and i would Think that the r33 non turbo would be the same. i know the rb2 and rb30e non turbo are.

basically if u want a car to make good power, then get something to hold good power. r33 boxes are basically bullet proof for the average driver. theres always someone who can break them though, which goes with most things.

definatley go the rb25det if u can afford it.

Link to comment
https://www.sau.com.au/forums/topic/16819-r33-gearbox/#findComment-348046
Share on other sites
GTS500 Community Regular

GTS500

Posted
Posted

RB33 turbo box is the strongest and seem to be good for about 450hp mine failed at 490hp,the gears in the gts-t box are about a 1/3 bigger than the vl-t box =alot stronger but unshore what hp they will hold.R33n/a box well if you put it beside the other two boxes it's tiny i don't think it would be good for much hp at all.

If you can get it go the gts-t box,hope this help's

Link to comment
https://www.sau.com.au/forums/topic/16819-r33-gearbox/#findComment-348243
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Before you blow your car up, have you checked you've made all the correct modifications to the wiring if you're still using the RB20DE loom?   Some things to look at: The pin used for the map sensor on the RB25DET, is the same pin used on the RB20DE for the Ring Gear Crankshaft Position Sensor, no idea what you've got it plugged into now. The turbo pressure control valve solenoid you're talking about on the RB25DET, the same pin is used for the Variable Air Intake Control Valve on the RB20DE.   The factory manual has the wiring pinouts in it for you to check everything. It also has the diagnostics process to read codes out. In addition, there's a great table that shows what sensors and what actuators not functioning will relate to which signals. And Nissan confirm the as everyone else has from experience, the Solenoid being disconnected won't cause a fuel cut. However, the turbo pressure sensor being missing / wrong, WILL cause a fuel cut. https://www.nicoclub.com/service-manual?fsm=Skyline%2FR34-Workshop-Manual-English.pdf
    • Butters
      Compressor flow comparison table

      By Butters · Posted

      I've been hunting info on the G Series II - this is best I have found so far(Link below). Still waiting on the G35-1150 comp map, kind of very keen   So how do we go about getting precision on that little table of yours ?   https://turbosbytm.com/sites/default/files/product/technical-info/Garrett-G-Series-II-Product_Flyer 25 30 35_1.pdf  
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      yeah I get ~0.6L per session into the catch can. very ethanoly. It ends up overflowing out the breather of the catch can on circuit days too even with a 2.3L capacity catch can and I only drain out ~0.6L max. So every session I have to come in and drain the catch can, which is a hassle. So this is me cracking the shits and doing everything I can without removing the motor (back of head sump drain/breather and oil restrictors off the table). plans short term are: full length splash plates remove oem cam cover baffle add foam and reinstall at -10 or -12 AN fittings to the side of the cam covers down to the sump (luckily I already have fittings in the sump) Yes the ~340,000km unopened motor is probably not helping things
    • Duncan
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By Duncan · Posted

      I'd use any fuel safe foam....mine went in 15 years and 15 rebuilds ago, still getting reused I'd have to say I don't understand swapping to studs to fit a particular baffle unless you are having a massive blowby issue, and even if you are addressing crankcase not head breathing is probably the next step.
    • Lithium
      Compressor flow comparison table

      By Lithium · Posted

      BTW, the reason I came in here to "update" this list was that the Garrett G Series II range have been released and I've updated the list with their flow details if you're curious to check how they fit with previous Garretts and other brands The G-Series II G35 990 looks like a banger...
×
×
  • Create New...