Jump to content
SAU Community

Recommended Posts

Before everyone says it's impossible they are basically what giant says he is running (well the garret equivalents) and he's apparently making close to 400awkw's and has a 1/4 time of 10.2s run on RE55 semi-comps to back that up.

And I used to think giant was running -5's or something until I saw he's making 300kw's at 3,500rpm which you'd struggle to get with bigger turbo's.

So with the right set-up's, fuel and tuning it might be possible.

Before everyone says it's impossible they are basically what giant says he is running (well the garret equivalents) and he's apparently making close to 400awkw's and has a 1/4 time of 10.2s run on RE55 semi-comps to back that up.

And I used to think giant was running -5's or something until I saw he's making 300kw's at 3,000rpm which you'd struggle to get with bigger turbo's.

So with the right set-up's, fuel and tuning it might be possible.

300kw at 3000rpm? Are you sure this giant wasn't the main star in a story involving magic beans?

Just kidding thats a fairly amazing setup. I'd love to see the details of that. And i'd also love to be proven wrong about the GT-SS's making 364awkw.

Before everyone says it's impossible they are basically what giant says he is running (well the garret equivalents) and he's apparently making close to 400awkw's and has a 1/4 time of 10.2s run on RE55 semi-comps to back that up.

And I used to think giant was running -5's or something until I saw he's making 300kw's at 3,000rpm which you'd struggle to get with bigger turbo's.

So with the right set-up's, fuel and tuning it might be possible.

That is HUGE average power if that is the case, no wonder his 1/4 times are so darn good. That would be a genuine 600+hp job... yeah? What a monster it would be on the street. :(

300kw at 3000rpm? Are you sure this giant wasn't the main star in a story involving magic beans?

Just kidding thats a fairly amazing setup. I'd love to see the details of that. And i'd also love to be proven wrong about the GT-SS's making 364awkw.

FYI since you probably don't check out the motorsport section - here's giants car doing a lap of wakefield in 1.04.2s (if you don't know thats pretty quick)

You can certainly see the way it pulls. But they are shifting at 7,800rpm which again shows they are smaller turbo's.

And here's another around some motokhana's that show's this car is always on boost.

If you want to know what's in the car read this

http://www.skylinesaustralia.com/forums/in...66392&st=60

I've seen this car in action and it is pretty damn insane.

Before everyone says it's impossible they are basically what giant says he is running (well the garret equivalents) and he's apparently making close to 400awkw's and has a 1/4 time of 10.2s run on RE55 semi-comps to back that up.

And I used to think giant was running -5's or something until I saw he's making 300kw's at 3,000rpm which you'd struggle to get with bigger turbo's.

So with the right set-up's, fuel and tuning it might be possible.

I'd also like to know more about this paricular setup as its the most power ive heard of for GT-SS. I'd like to know how its done so i can do similar

What cams, comp, boost with what fuel, support mods etc and by Garrett equivellent i assume you mean the 2860R -7 ?

EDIT: Thanks, too quick for me!

I've seen this car in action and it is pretty damn insane.

and i'm guessing it's the reason (well one of the reasons) you are going back to N1s from the 2530s. :(

I personally am having a terrible time making up my mind between the SS and the 2530s.

things for the SS:

the are $500 cheaper than 2530s

they will be more responsive

things against them:

i'll have the same set-up as 90% of GTRs out there (yes I'm a wanker and like to be different)

the 2530s can make more power, and so many quick japanese GTRs are using them

i may need a fair whack more boost to achieve the same airflow (power) compared to 2530s.

but my power aim is between 320 and 360rwkw. with as much response as possible. it's a tough one.

hi Roy

i will try and tell you what we have found really important and our mods.

power is approx 380 to 400 kw's @all four depending on weather and temp.

so yep, still 2.6 bore size, 270 cams tomei, adj cam gears, cleaned up cylinder head ports, n1 valve springs,cp pistons, tomei rods, n1 oil pump with reinmax gears(also use tomei oil pump previously), hi octane racing large sump (will be going to a hi octane racing 4 stage dry sump in a month or so) standard exhaust and intake manifolds, are intercooler, n1 garret equivelant turbo's, greddy intake boost pipes, apexi airfilters, autronic ecu and cdi ignition,gonzo exhaust, vp109 fuel( good for 30kw's and much safer than pump fuel), tilton brake pedal box, australian spec tein suspension, bosch fuel pumps, advan suge tank, npc clutch ( i swear by it!!), carbon tailshaft. block and crankshaft are standard, acl race bearings, 25 row oil cooler, standard blow off valves. we also run a water sprayer for the radiator and oil cooler for longer circuit runs.

we have tried hard to make the power come on hard down low in the rev range , which makes it easier to drive, we tried aftermarket extractors and the car made more power but we lost over 500 rpm before boost would come on so we went back to standard manifolds, adjust cams to get power as early as possible, car has over 300 kw's at 3500 all the way to rev cut, rev cut we have lowered to 7800 till we get a dry sump.

the other thing we have spent a lot of time on is the 4wd system and wheel alignment setup, nearly all r32 gtr 4wd drive systems we have looked at including our car when we got it, do not function as they should. wheel alignments also have been a real issue. we have had a lot of trouble get alinment shops to align to the spec you ask for and ahen checked they are way out!! we now do all our wheel alignments by string line and have had far better results.

the car will be coming off the road in two months(after nsw dutton and maryborough sprints) for a full rebuild, dry sump if not before) , side exit exhuast for events that allow it, chromoly strut to strut cage, try to lighten it some, total repaint, stack dash , hopefully carbon doors, bigger swaybars & a few other changes.

hope this helps if you want to anything specific just ask

cheers russ

What a monster. Awesome setup.

He says Garrett equivilent N1s...?

FYI since you probably don't check out the motorsport section - here's giants car doing a lap of wakefield in 1.04.2s (if you don't know thats pretty quick)

You can certainly see the way it pulls. But they are shifting at 7,800rpm which again shows they are smaller turbo's.

And here's another around some motokhana's that show's this car is always on boost.

If you want to know what's in the car read this

http://www.skylinesaustralia.com/forums/in...66392&st=60

I've seen this car in action and it is pretty damn insane.

Thanks a lot for the links. I have heard many things of this car previously which is why I never doubted what you stated about it. Just suprised to learn what he is running although he is running N1 equivs and not GT-SS equivs. N1's are bigger than SS's so I gather the Garrett N1 equivs are also a step up in size over the SS's. I don't doubt this output from N1's but SS's are another story right?

yeah, there are two versions of R34 N1s. one has .42 comp and .64 ex, the other has .60 comp and .64 ex. one is basically a GTSS, the other is basically a 2530. I'm not sure which one Russ is using.

Thanks a lot for the links. I have heard many things of this car previously which is why I never doubted what you stated about it. Just suprised to learn what he is running although he is running N1 equivs and not GT-SS equivs. N1's are bigger than SS's so I gather the Garrett N1 equivs are also a step up in size over the SS's. I don't doubt this output from N1's but SS's are another story right?

I think you'll find most agree that N1's, GT-SS and 2860-7's = almost the same thing.

Yeah, Giant isnt running PULP. Thats the key factor.

I picked up around 40-50rwkw just by changing fuel myself way back when and laying on the timing thick and hard.

However, I doubt anyone has a hope in getting much more than 320-330rwkw unless your on the juice.

Project Mu - Dyno sheet and please tell us what fuel you are using, as you can clearly see from the RB26 dyno sticky thread that not one person has come remotely to that result on PULP.

So for me, its happy dyno love for your result

Hi

I just want to find out the max power available from HKS GT-SS turbos

I have 488hp at all four wheels (364KW) at 1.5bar (22psi)

Post your results....

Let me guess hub dyno? If so the power looks spot on. Hub dyno's shit on roller dyno's but they confuse the public as they read higher.

Edited by URAS
  • 5 years later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 馃挭馃徏 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 馃ゲ But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
  • Create New...