Jump to content
SAU Community

Hks Ssqv Atm Dump And Idle Stalling Power Fc Fix

h2k

By h2k,
in Engines & Forced Induction

 Share

Recommended Posts

h2k Enthusiast

h2k

Posted
Posted

I have a HKS SSQV atm dump valve and power fc in my rb25det, I'm having problems with the engine stalling when I rev it then push the clutch and let go of the throttle. It often happens in stoplight crossing etc and is really annoying.

Is there any settings in PowerFC I can adjust to make it stable when falling down towards idle? I've tried rising the idle rev up to 1k rpm but it does not help.

Is the only fix to resirk the dumped air back after the maf? I've heard you can tighten the ssqv spring?

h2k Enthusiast

h2k

Posted
  • Author
Posted

So this is something a dyno tuner can fix when they map the powerfc?

what do you mean "get a real bov", it is a genuine HKS SSQV, not a ebay fake. I also bought the resirk kit but have not installed it since because it will be about 1.5meter with 35mm air hose to resirkulate the air back to the inlet after the maf.

#1

map tracer

repeat the stall

then tune those areas it runs across when it stalls

or

#2

get a real bov

#2 is easier

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

There is a quick, free fix. Put the stock BOV back on.

Thats what Paul means by a real BOV, one thats actually designed for a purpose :D

A tuner can tune out the stalling if they know what they are doing.

STATUS Grand Master

STATUS

Posted
Posted

2 seconds with the datalogit and i gaurantee no stalling no matter what bov. It is all a matter of catching the idle.... bit of timing tweaking and fuel fiddling and all will be sweet.

Devils_Advocate21 Mentor

Devils_Advocate21

Posted
Posted

Yep reall BOV well one that recirculates or "plumbs back" into the intake after the afm and before the compressor, problem solved, although it can be tuned out aswell but as mentioned recirc is easier

h2k Enthusiast

h2k

Posted
  • Author
Posted

The original GTS25t bov is rumored to leak above 1bar boost, so I bought the HKS ssqv. I have the resirkulation kit but I kinda fell in love with the atm dump sound :D I just got the engine up and running after a complete rebuild so im taking it to a dyno tuner shop next week. I only now how to set up the basic settings in powerfc to make sure it runs on safe AFR values and not leans out.

So then it is settled, I'll let the tuners program powerfc with a laptop and the stalling problem will be solved!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...