In A R32 Gts-t What Measurements Does The Stock Boost Gauge Read? And What Psi Is Stock Boost In A R32?

[kelumzi]

Got two questions to ask!

In a R32 gts-t what measurements does the stock boost gauge read? (Reads -7 to +7)

Second questions, what psi is stock boost in a R32? Been reading a few threads. some say stock boost is 6psi others say 10psi can someone clarrify?

Apperciate it, cheers

Edited May 14, 2007 by kelumzi

[DRD-00F]

i know the 33 stock boost gauge is in Mmhgx100... 7 = 1 bar = 14.7 psi approx

again, if 32s are like 33s then its 5 psi before 4500rpm, then 7 above...

[made_guy]

hey i have something to ask about this too - should the needle sit around half way between 0 and -7 at idle? i thought it would sit at 0 but mine doesn't??

[DRD-00F]

yes it will sit at almost the lowest point it can... depending on what mods you have... about -5... very very low...

[made_guy]

ahh sweet thanks for putting my mind at ease

[DRD-00F]

no worries, come back any time

[Rekin]

stock boost gauge measuers in mmHG or something, it says on the dash cant remember.

Standard boost for a r32 gtst is 10psi.

Once you change exhaust/intercooler the boost will slightly increase to 11psi~