Jump to content
SAU Community

Fuel Freedom International

mle808
 Share

Recommended Posts

mle808 Enthusiast

mle808

Posted
Posted (edited)

Hey guys,

I was given this website by someone I know who has just purchased one of their products(tables for fuel tanks). Fuel freedom international claims to have a product which increases power AND economy in both petrol and diesel engines via a capsule added to every tank refill.

After looking at the demo vid their product seems like a capsule which is added to every tank of fuel and works as a catalyst to combust the fuel more efficently inside the chamber.

The demo vid is on the front page. Check it out.

They also go on to say that..temperatures in the exhuast manifold will decline as combustion will be greater inside the combustion chamber and reduce combustions as the mixtures are exiting to exhuast manifold

Is that possible? If temperatures decrease like they say...wouldn't that mean less detonation/pinging?

Anyways, here is the link.

So yea, check out that vid and a quick read if your interested enough.

I want to know how this works...they obviously won't tell us exactly how.

After watching that vid, i was interested in how else can we mimic the exact same perfect combustion proccess? ecu tuning? ign?

What i mean is, when we get our computers/ engines tuned...are we basically aiming for the same thing?

I thought we try to increase the duration of the igniting process to get more power... but then...i don't have much knownledge of the technicals of this.

maybe you guys can elaborate.

Will this product be more useful on a normal passenger viehcle? Will it be bad on a sports engine? Or do you think is just another scam?

Discuss away...

And no...I'm not trying to scam anyone...

I think when you purchase the product or register online your given a link with your username..must be some sort of rewards program. So be sure to use that link if your going to register.

Edited by mle808
Link to comment
https://www.sau.com.au/forums/topic/168683-fuel-freedom-international/
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Looney_Head
      R32 GTS-t RB30 sedan

      By Looney_Head · Posted

      Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • GTSBoy
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By GTSBoy · Posted

      Ceramic coating and heat shielding, you mean?
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
×
×
  • Create New...