Jump to content
SAU Community

Selling Parts Due To Write Off

DownLow
 Share

Recommended Posts

DownLow Rookie

DownLow

Posted
Posted (edited)

Unfortunately last night my car was written off when I let me mate take it for a drive. Thankfully no one was hurt or killed but my R33 GTR didn't survive. I have been buying parts for last 8mths for a rebuild but that will not be going ahead anytime soon so I have to sell them.

Parts for sale

  • R33 GTR RB26 Bare Long Engine *60,000kms* $2200 good order 165-170psi across all six cylinders
  • HKS 2540 Turbo Chargers *5,000kms* $1700
  • Apexi Power FC and Controller *Good Condition* $900
  • ARC Intercooler *Good Condition* On Hold
  • Apexi RB26 Conrods *NEW* $1700
  • Tomei RB26 87mm Piston Kit *NEW* On Hold
  • HKS Valve Springs *5000kms* $600
  • JUN Titanium Retainers *5000kms* $400
  • Tomei Lifters *5000kms* $600
  • HKS Oil Cooler Kit *5000kms* $700
  • Sard 650cc Injectors *NEW* SOLD
  • R33 GTR Brembo Brakes *50,000kms* $1400
  • R34 GTR Wheels *good condition-no tyres* $1800

Prices are negotiable and exclude shipping costs. All parts are in good working order

Parts are located in North Wagga Wagga. I am willing to send the goods anywhere in Australia via Australia Post. Unavialble on weekends.

For more info please PM or [email protected] for pictures

Thanks

Edited by DownLow
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Lets play a game - What is causing my oil consumption?

      By Dose Pipe Sutututu · Posted

      I am going to chime in here and say that is very bad advice for a built motor, making decent power of 400kW+ Especially if the rings have been gapped on the looser side. The more power you make the heavier you need your oil to be to be able to maintain that suspension between the moving parts, if not you'll have journals and bearings making love and grenade a motor. Remember that all moving parts inside the motor aren't ball bearing and are journal bearings and require oil to separate the surfaces from contacting.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Yeah I noticed this just now. No doubt she will be running smoother next start😂🤣😂
    • joshuaho96
      ENR34 - Leaking Transfer Case

      By joshuaho96 · Posted

      ENR34 manual transmission transfer cases are 33100-23U00 which is shared with all of the R32/R33 GT-Rs and GTS-4s. And the C34 Stagea. Do not bother with automatics, that is a huge effort to swap and the car will be worse for it. And an automatic transfer case does not have the right housing for the shifter which comes out the back of the transmission and goes through the transfer case. I already posted my response on reddit but if you didn't see it there here it is: You have almost certainly damaged the transfer case, the only question is how badly. Nobody can tell you how bad without more information. If you have a giant hole in the transfer case pissing out all the transfer case fluid then you need a new one. If it's not that bad then the only question is whether you burned up the clutches. Drain the transfer case oil and inspect for metal on the drain plug magnet. Small black filings are normal. Big chunks of metal or a ton of black fuzzies not so much. Fluid should be nice and red. Any other color isn't great. If the color is reasonably red and there's not a bunch of clutch material discoloring it or anything like that you probably got away with insubstantial excess wear not worth trying to fix. If you have to rebuild or replace the transfer case keep in mind you have to pull the transmission to get it off.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      As promised………… the first start. Rough and a few bugs to work out. Still she lives att.1cnTUvrWxiOZUFbg0S43m1VFUdDhxGBq3UU53bvtkww.mp4
    • blind_elk
      Lets play a game - What is causing my oil consumption?

      By blind_elk · Posted

      Can I suggest a 15W50 oil is too heavy. Its a brand new engine - you should be able to run something like a 10W30. Shove some steel wool into your catch can  - more technically "oil/air separator" - so that the oil vapour has something to condense on.
×
×
  • Create New...