Jump to content
SAU Community

Recommended Posts

Keyword there - stock airbox.

You put a decent flowing panel filter into the airbox and you'll find that there is no really difference from that and a pod until your making some seriously big power.

I think Dezz did a back-to-back test Airbox & Pod (no cai boxing) on the dyno, there was a marginal increase in power and a skerrick in mid range.

However, the increase was so small that you would not notice nor feel on the street. The extra 2 or 3kw is dick all in the big picture for a street car.

And i would go on a leg to say if it was in a secenario with high under bonnet temps the pod would let you down noticeably

Basically for a streeter upto 250rwkw. Your better off with the airbox than a CAI/Pod setup if you look at the cost vs gain if your on a budget.

As it leaves money to be better spent in other areas

I found with the stock box the intake pipe would suck in and block under full load. Therefore this demonstarted to me the box has some restriction cos a pod does not do it at all. I found this to occur on the dyno at ~230-40 rwkw. You could replace the intake with a metal one, but your just masking the problem IMO. However a metal one is better anyway.

You could vent it better like some have done. But I CBF so I ran a pod.

I was suprised when this happened. but it did happen.

You're probably describing the sound from the stock BOV recirculating air on partial throttle openings to make your drive smoother. I guess you could hunt down an aftermarket recirculating valve that doesn't do this if you really want to keep the pod.

Hmmm... nice idea. Thanks - that might be the go.

Although I am starting to have fun with it now :P

when I first ehard the noise on friends car I though it was a BOV~~ the he showed me it's only th pod~~ sounds nice whats wrong with it~~

with regards having pod filter pipe going under the CAI box tray, I recon you'll get heaps of bug on there. Been considering it, I mean if you get some cheap ass $10 pod filter that's ok.. but if you get those Apexi $200+ and all the bugs splatered on your filter.. that's gonna cost heaps for maintenence..

Hey fellas

I just got my pod filter from Slide (thanks Aaron) and after installing it I've noticed something I didn't expect. Basically there is a really loud rushing air sound whenever I come on boost. I was looking forward to a bit more induction noise, but this is just embarrasing.

I've never put a pod filter on a turbo before, but on an N/A engine you just get a deep throaty growl and I was expecting something similar with perhaps a bit of a gushing sound when the BoV opened.

Is this constant rushing sound normal for turbos or is my blow off valve knackered?

Cheers guys

SII R33 GTS25t

(Stock other than Apexi pod)

LOL embarrasing?

that hard/loud induction noise is pretty much what got me into turbocharged cars, specially skylines since they got very loud induction noise and you only need a POD to get it out of em :P

Edited by R-SPEC

if you think thats a loud sound - come and stand near mine at 18psi with a 4 inch stainless pipe, and a GT3076 sucking at the other end..

Then you turn some heads.... Or maybe cause some people to dive for cover cause they think there is a cyclone coming to tear their house out of the ground..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
    • I'm not 100% how the BMW racers do it, but I know from other brands like Merc, moving, and changing the coolers is one of the things. Like getting a transcooler out from infront of the radiator to out near a wheel arch. So some of the stuff you've got crammed in the middle front, spread it out and open up where you can in the bar to get more air in to the sides.
    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
×
×
  • Create New...