Jump to content
SAU Community

Recommended Posts

Keyword there - stock airbox.

You put a decent flowing panel filter into the airbox and you'll find that there is no really difference from that and a pod until your making some seriously big power.

I think Dezz did a back-to-back test Airbox & Pod (no cai boxing) on the dyno, there was a marginal increase in power and a skerrick in mid range.

However, the increase was so small that you would not notice nor feel on the street. The extra 2 or 3kw is dick all in the big picture for a street car.

And i would go on a leg to say if it was in a secenario with high under bonnet temps the pod would let you down noticeably

Basically for a streeter upto 250rwkw. Your better off with the airbox than a CAI/Pod setup if you look at the cost vs gain if your on a budget.

As it leaves money to be better spent in other areas

I found with the stock box the intake pipe would suck in and block under full load. Therefore this demonstarted to me the box has some restriction cos a pod does not do it at all. I found this to occur on the dyno at ~230-40 rwkw. You could replace the intake with a metal one, but your just masking the problem IMO. However a metal one is better anyway.

You could vent it better like some have done. But I CBF so I ran a pod.

I was suprised when this happened. but it did happen.

You're probably describing the sound from the stock BOV recirculating air on partial throttle openings to make your drive smoother. I guess you could hunt down an aftermarket recirculating valve that doesn't do this if you really want to keep the pod.

Hmmm... nice idea. Thanks - that might be the go.

Although I am starting to have fun with it now :P

when I first ehard the noise on friends car I though it was a BOV~~ the he showed me it's only th pod~~ sounds nice whats wrong with it~~

with regards having pod filter pipe going under the CAI box tray, I recon you'll get heaps of bug on there. Been considering it, I mean if you get some cheap ass $10 pod filter that's ok.. but if you get those Apexi $200+ and all the bugs splatered on your filter.. that's gonna cost heaps for maintenence..

Hey fellas

I just got my pod filter from Slide (thanks Aaron) and after installing it I've noticed something I didn't expect. Basically there is a really loud rushing air sound whenever I come on boost. I was looking forward to a bit more induction noise, but this is just embarrasing.

I've never put a pod filter on a turbo before, but on an N/A engine you just get a deep throaty growl and I was expecting something similar with perhaps a bit of a gushing sound when the BoV opened.

Is this constant rushing sound normal for turbos or is my blow off valve knackered?

Cheers guys

SII R33 GTS25t

(Stock other than Apexi pod)

LOL embarrasing?

that hard/loud induction noise is pretty much what got me into turbocharged cars, specially skylines since they got very loud induction noise and you only need a POD to get it out of em :P

Edited by R-SPEC

if you think thats a loud sound - come and stand near mine at 18psi with a 4 inch stainless pipe, and a GT3076 sucking at the other end..

Then you turn some heads.... Or maybe cause some people to dive for cover cause they think there is a cyclone coming to tear their house out of the ground..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's awesome. Fully serviced/full log book history for one of those cars is super rare from what I know. With JDM's like Skyline's, Supras, are quite hard to find one with full log book history. S15's seem to be somewhat of an exception, at least the spec s australian delivered models.
    • Hey all, It's been a bit since I have been able to update.  I pulled the fuel pump, first off it was a "universal" pump and the strainer was very clogged, and it was folded over on itself.  I replaced the fuel pump and all is well....  No more stalling.
    • That's convinced me I'll bump up the G30-660 to 770   Any idea if the difference in boost pressure? Cheers
    • When: Saturday 24th of May 2025 - All day Where: Sydney Dragway, Eastern Creek Cost: Varies - Book direct with the GTR Festival Website We will be there on the day with a stand please reach out via our interest form if you wish to help out with the stand. Limited parking will be available in the display area, first in first served with current members getting priority, please register your interest with the link above also. Please post any great photos you take on the day on this thread and we will try use some in our e-mails/website/social media
    • Hey guys so turns out this project is going to be much bigger than I thought haha but I've done some my homework and have done a few panels on my car, but one part I can just not visualise is this. If I do a spot repair and I put filler in a dent for example and sand outside of the repair with 320 grit lets say so the primer can stick as I will only put primer on that repair and the surrounding area and then repaint the whole panel. Don't I need to make sure that I don't put primer on the old clear coat? I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down, it's still shiny. I thought putting paint on clearcoat or primer on clearcoat is a bad idea because it won't stick. So in this scenario it's a bit different to mine but imagine someone doing a spot repair and only painting that small section of repair but the new paint is landing on the old clearcoat. What am I missing?
×
×
  • Create New...