Safc + Afm On Your Nics Rb20det

[RB20_ZED]

As it says -

Has anyone put a SAFC (or similar) and a different AFM (R32/R33/Z32 etc etc) on an NICS RB20det???

Just need to know if it can be done? and if so, where did u get it tuned? (or who you might recommend)

Thanks in advance!

[HR31_RB20DET]

I haven't heard of anyone running a different afm on a Nics before.

Have a read here which has a bit about the safc on a Nics: Click here

[SkyGts4]

Whats a NIC's? By the way I had a rb20det ecu(setup for a standard rb20det AFM) running perfectly with my 300zx afm & safc2...there's a special setting in the safc2 to configure the 300zx AFM. I hope that helps.

[HR31_RB20DET]

Whats a NIC's? By the way I had a rb20det ecu(setup for a standard rb20det AFM) running perfectly with my 300zx afm & safc2...there's a special setting in the safc2 to configure the 300zx AFM. I hope that helps.

The Nics is one of the early HR31/200ZR redtop versions of the Rb20.

[RB20_ZED]

I haven't heard of anyone running a different afm on a Nics before.

Have a read here which has a bit about the safc on a Nics: Click here

Thanks for that - got a good insight into the issues.

I've got it in at a shop getting tuned at the moment... seems like good news so far.

[HR31_RB20DET]

Thanks for that - got a good insight into the issues.

I've got it in at a shop getting tuned at the moment... seems like good news so far.

Good stuff, I was thinking of putting a SAFC on mine as I've got a jap chipped ecu for my Nics which runs a bit rich and made 160rwkw with afr's dropping as low as 10.8:1.