Jump to content
SAU Community

Recommended Posts

Just putting the word out there that Round 3 of the NSW CAASQ (Car Audio Australia Sound Quality) Competition is coming up in just over a week.

For those who are unaware, there's a whole bunch of car audio competitions going on around Australia year round, catering for both SQ and SPL. CAASQ is one of them.

There are a bunch of classes ranging from Amateur to Professional, and it's open to anyone, not just those with super duper systems. SAU has even been lucky enough to get some representation, with a forum member (Liquid) picking up two awards at the last round.

Anyway, here's the details:

When: Sunday 27th May, 2007

Where: Stuart Park. This is behind Wollongong North beach and comes off George Hanley Drive. The map below is marked with a small circle.

Time: Registration for the competition starts at 08:00 and judging begins at 10:00 sharp. We get there around 08:00 to get undercover tables and a couple of BBQ’s etc. Anytime after that though is fine - finish is usually around 17:00-18:00. We do stay back to chat and mingle though.

Cost: $35.

The planned order of events for the SQ side of the day are:

Amateur Street Class

Amateur Show Class

Pro Street Class

Pro Show Class

Award presentations

Food and drink is being supplied by FHRX Studios, they ask for a gold coin donation (or more) which goes to charity.

Anyway, details can be found on the MEA forum: http://www.mobileelectronics.com.au/forums...showtopic=83562

Vijay

sound_off_map_2.jpg

Link to comment
https://www.sau.com.au/forums/topic/168832-nsw-caasq-round-3/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...