Garage Sale ** Brisbane** Parts & Pics Updated 2/12

[familka gtr]

Hey guys and girls, i still have some parts leftover from my previous garage sale and some more so here they are, i will keep adding if i find anything.

FORMULA Z High performance engine oil,10W-60, high performance or turbo use, original made in Japan, comes in two 2 litre tins, comes with 2 stickers for change $ 60 for both

GTR style but bit bigger custom intercooler made in JAPAN. Tested 60 psi rated up to 1000 Hp .easy to fit 650$

Custom made intercooler, Huge , very good condition,polished, profesionally done by fabrication workshop $ 220

core 60x480x620 . Coler lenght 800 mm , pipes 60mm diameter

TEIN adjustable pilow ball castor rods in perfect condition .Suitable for R33 or 200sxS14 220$ or swap for s 13 or R32 set in same condition

Japanese Remote Car starter Kit, perfect when "mafia" is after you, comes complete with wiring, remote, antenna, control box, $ 100

Speco 2-5/8 black face gauge, Havent installed it myself and dont have a use for it so i will let someone else enjoy it Water temperature gauge only , with sender come with grey bezels etc $50

BIG genuine HKS plumback type Blow off valve, on SR20 intercooler plenum pipe, straight bolt on or can be used on any other forced induction car, unique high power bov from Japan produced by hks, similar to type-R by greddy but bigger. $ 160

Few Turbo timers from 40$ up to 80$

R33 Stock Airbox, complete , great for compliance or clearing defects, or very efficent if opening made larger with quality performance inbox airfilter, $ 70

Blow off valve Japanese brand on R32 stock intercooler pipe,Plumback option DEFECT FREE , straight bolt on to rb20 or maybe even rb25 etc, or could take it of pipe and suit any car or cut pipe up. $120 gc

Genuine BLITZ BOV on stock R32 intercooler pipe with factory adapter $180

Aircondition compresor for R33 Skyline RB25 working before been removed 130$

Air condition compressor R32 RB20DET 93 , 130$

Air condition compressor 180sx CA18DET 90 , 130$

Front GTR gearbox cover 40$ ono

R32 Skyline interior carpet in good condition from 2 door 93 model - 50$

R32 Skyline 2 door interior plastic rear 1/4 panels both sides 50$ or 30$ each

R32 Skyline 2 door in booth side covers 30$ each or 50 $ both ,tile lights cover 30$

R32 Skyline 2 door surround plastic rear side window 40$ pair / one good , one reasonable /

R32 Skyline GTR rear interior 1/4 bottom part 40$ pair /one good , one reasonable /

R32 4 door Skyline rear complete beaver cut all parts inc 400$

R32 2 door , set of rear seats 93 model $100 both

Fuel tank GA70 supra TT complet - pump& senders incl $ 200

Few fuel flaps $20 each

Rear window for R33 SKYLINE 4 door and 2 door without rear wiper holes. Very hard to find.PM me if You have interest and for price.Prefer pick up.

R33 coupe passenger and driver door windows $140 each or $220 both

Stock exhaust system for S15 Silvia/200sx in perfect condition suitable for compliance or defected vehicle or just as replacement cat - back , 100 $

GFB style blow off valve to suit a wrx top mount cooler can be take of adapter,can be used on any other car, brand new never used comes with adapter. $80

Custom made Triple gauge fiberglass holder for exterior or interior, ready to paint and holds 3 52mm/2 inch gauges $ 80

pics in replays

Nissan 300ZX Z32 89 model up rear taillights in good condition, smoked black, both no cracks with bulbs etc very nice look for your Z, these were smoked by someone in Japan $120

Nissan 300ZX air condition condenser $100

Nissan R33 air condition condenser 100$

Nissan R32 air condition condenser 100$

Nissan 180 sx CA18DET air condition condenser 100$

Nissan 300ZX air condition condenser 100$

Custom made inter cooler, big item, works a treat, been sprayed silver and black for the end tanks $120

core size 70mm x 175 x 650 . Full lenght incl end tanks 940 mm and out pipe size 60 mm diameter.

200sx S15 rear bumper no reo, black perfect condition few scratches on paint $70

Nissan silvia s13 Rear bumper with reo bar 3 complete set, white & black $180 ea

180SX rooflying good condition non sunroof $ 30

Front Lip r33 GTR , Nismo style, brand new never fitted, DOT approved $120

Toyota MR2 SW20 , roll cage with black or white padding 500$

Front bumper 180sx SR20 type, no reo $180 ea , 3 to choose from, Gunmetal grey , white and Gold

Set of 5 TOPMIX Gauges had 2 sets originally and put one on car and bought another for brother but he never gave me the money so they were lying here for a while, all boxed, led light blue, 52mm, never used before consist of electrical Air/Fuel ratio, Oil temp, Water temp, Oil press and Volts, trick out your ride for . 150$

Auto Gauge brand 52mm Oil Pressure gauge, brand new, comes with sender unit and all fittings including English instructions, brand new in box $35

Genuine SARD oil filter to fit 3sgte Toyota turbo engine as well it fits 4age's, brand new with seal and Sard mileage sticker with it $45

Rear spoiler , Aftermarket white, for Nissan silvia, 33gtr modified to fit on silvias boot, $160

Rear spoliers for S13 Silvia CA and SR some with brake light 20 each

Rear set of tile lights with center one for 180SX $120 whole set

S15 Silvia stock exhaust system cat to back in perfect condition $100

R33 Standard turbo exhaust complete cat back,NEW condition Good item for defected vehicle or get Your car complied $100

R32 Skyline Fujitsubo exhaust, Cat - back JASMA approved, Increase power legally, $175

180 sx rear muffler 3 inch, comes with flange, APROF Jap brand, with a 3.5inch chrome tip $140

MA70 RED Supra drivers seat, great upgrade for any ride, comes with rails $80

20 mm thick wheel spacer bolted on 4x114.3 for S13, NA R32, etc 120 $ pair

Quality HKS mushroom air filter with rubber and clamp, good condition with a 3 inch connector, perfect for higher hp upgrade, can be re-used/cleaned Southside Brisbane can organise delivery , $75 pick up.

Nissan pulsar GTiR tile light 50 each or 90$ for pair , rear tail gate 100$ , driver door 100$ ,

Speco style shift lights with stand , brand new never been fitted $ 80

Nitrous Oxide Nos wet shot universal complete kit, adjustable jets and suits most efi cars 3cyl,4,6,8, Original made in USA with original instructions, 14psi big bottle comes with about 6 meters of braided lines, all fittings switch, fuzes etc, costs about $28 to fill up, just set up amount of hp u want to run perfect for na drifters or if you re after cheap power, forget about crappy dry systems this is what you want, $630

Edited April 19, 2008 by familka gtr

[ak_stylez]

im interested in the r33 s2 front bar...

do u have the indicators too? any pics?

also pics of the nismo lip?

thanks

[doriftee]

pics of topmix gauges to [email protected] please

[rad100]

u got r32 air con vents???

[Drift_Learner]

Geeeez thats a big garage. Interesting in several RB20DET performance bits. Mostly the Turb timers, any of those have install instructions? Where you located?

[familka gtr]

im interested in the r33 s2 front bar...

do u have the indicators too? any pics?

also pics of the nismo lip?

thanks

pics sent by PM

pics of topmix gauges to [email protected] please

pics sent by PM

u got r32 air con vents???

pm sent

Geeeez thats a big garage. Interesting in several RB20DET performance bits. Mostly the Turb timers, any of those have install instructions? Where you located?

I am in south of Brisbane

[familka gtr]

lets go guy . I am neg specialy on big items as I want to clean my garage and backyard.

[Sexual_32]

wat happened 2 my pm on boost man? u said i could have hand controller n that we could test try it.. then u bailed n put it up 4 sale..and for different price.. spewin'

[rad100]

hey keen on the tripple gauge pod!!! u got a pic?? cheers

[familka gtr]

[limpus]

Got a pic of that r32 catback? Email [email protected] or post them up if you got any...cheers....

[cepatsikit]

pics of topmix gauges to [email protected] please

[familka gtr]

FUJITSUBO cat back and TOP mix Gauges

[sugarbabyrx7]

HEY DO U KNOW IF THAT FRONT LIP FOR R33 GTR WILL FIT GTST???

0416 526 627

KEEN!!!

[bloodsword27]

mate those castor rods do NOT look perfect. the botom one on the right side looks as thought the the end bit is broken. i have a s13 set of cusco rods ready to trade for your R33 ones....

[familka gtr]

HEY DO U KNOW IF THAT FRONT LIP FOR R33 GTR WILL FIT GTST???

0416 526 627

KEEN!!!

You can fit on but you need to modified litle bit.Cut in the middle and put back together as GTR is a bit wider.

mate those castor rods do NOT look perfect. the botom one on the right side looks as thought the the end bit is broken. i have a s13 set of cusco rods ready to trade for your R33 ones....

Nothing is broken.They are in perfect condition no bended , or damaged in any way.

Its only the rubber cover over the pilow ball body, and way do you want to swap if you think is broken anyway ?

Send me pics of Yours rods by PM.

Looks beter here?

Edited June 8, 2007 by familka gtr

[madaz R33]

whats the pfc hand controller suit?? RB20 or RB25 ?

[bloodsword27]

what is the condition of the bearings on the castor rods? the s13 set i have has 1 side which is soft but doesnt affect its usability ...

[familka gtr]

whats the pfc hand controller suit?? RB20 or RB25 ?

RB 20 and one for RB26

[madaz R33]

RB 20 and one for RB26

how much are u asking for the RB20 pfc hand controller, what cond etc ?