Jump to content
SAU Community

Auto And Manual Radiator Differences?

johnabs

By johnabs,
in General Maintenance

 Share

Recommended Posts

johnabs Community Regular

johnabs

Posted
Posted

Hey,

i got an r33 series 2 and my radiator is leaking. I was wondering if auto or manual radiators would make a difference becuase i think they are the same. Would a GTT or GTR radiator git in without mods. i just want to straight swap but personally rather a r33 s2 one.

thanks

john

TTT Grand Master

TTT

Posted
Posted

In the R32's the Auto radiator had a small section under the radiator for the auto trans fluid to go through for cooling.

it has a hole at each end for that.

Not sure how the R33's are.

it will still work fine thought..

the auto fluid holes don't actually go near the coolant..

SECURITY Grand Master

SECURITY

Posted
Posted

if your car is auto, get an auto radiator UNLESS you have a decent sized aftermarket core, then you can re-rout the feed directly to it.

the reason you cant use a manual one is because the coolant helps cool down the oil a bit before reaching the actual trans cooler core. the manual radiator doesnt have this feature.

if your car is manual you can use either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Need AC Compressor for R32

      By soviet_merlin · Posted

      Out of curiosity, what's the reason for converting? I think @R3N3 might have the Frenchy's kit in the R33? I somehow think of you as the ambassador for realistic and clean street-driven setups nowadays  
    • V35_Paul
      V35 Overheat + Coolant Boil & Overflow + Engine not Starting

      By V35_Paul · Posted

      careful when running the car after a boil over. Ive heard you can lose enough coolant that it won't show the right temps because of too much air in the system (or something like that). Make sure the levels are good before trying again.  Maybe a mobile mechanic can come have a look with their scan tool ?
    • GTSBoy
      Need AC Compressor for R32

      By GTSBoy · Posted

      OK, just for some extra clarity - there is more than one option at Frenchy's. 1. You can buy the whole kit - with or without the actual compressor. The whole kit includes mounts, hoses, condensor, etc. That's either ~$2200 or ~$2800. No surgery required with this option. 2. You can buy just the bracket (~$600), or the bracket with the compressor (~$1200). Either of this or the above option "without the compressor" is if you already have an Echo comp or you are able to source one locally. Whatever the case, in this option, you will need surgery done on your hoses to adapt to the new compressor. When I said "the Frenchy's kit", I meant the whole kit in option 1. It is obviously somewhat more $$ than a $1500 OEM compressor. But if I had to spend $1500 on an OEM compressor, I would certainly consider spending double that to renew and significantly update everything forward of the firewall. Another option is to rebuild your original compressor. My R34 comp is currently dead and I will be most likely doing that to it if the spare one in the shed is also leaky.
    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      I’m thinking that’s the route I’ll  go, thanks for the input!
    • carnoobb
      V35 Overheat + Coolant Boil & Overflow + Engine not Starting

      By carnoobb · Posted

      Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
×
×
  • Create New...