9.5" Rims On An R32, Fouling On Hicas?

[SOOKIE]

I have an R32 and I've just got some 17" WORKS that are 9.5" wide for the back. When I fit it the first time, the car actually wouldn't move as the inside lip was fouling on that thing (HICAS) which is attached to the brake hub and has rods going behind the diff. I thne put some 8mm slip on spacers and it doesn't foul in a straight line but when I turn the steering wheel it does rub. I really don't want to go bolt on spacers as the rims already stick out the guards, what can I do? does this mean my HICAS is still engaged?

Edited May 19, 2007 by SOOKIE

[BHDave]

I was going to say file the nub off the tie rod end but you already have.

With the wheel that far inboard, confirm that it is actually the tie rod end rubbing, as it could also be the wheel hitting the strut or the front of the lower control arm when you turn and load up the suspension.

[T04GTR]

what offset are they?