Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

prepare to be recorected... :spank: .mine runs for 5 minutes before it turns its self of

seires 2, ... mine runs for ages, one morning turned it on via remote ... hard to do some things that took longer then expected 10mins plus.

only turns off when any door is opened, which is very silly but has it reason also.

stopped using my remote as the alarm started to play up wouldnt disarm itself when i tried to unlock it. very embarrasing moment at a crowded carpark :down:

i have been dreaming of this day since before i had my stagea . but my car doesnt have the switch . cant find it and no screw holes in the kick panel . can someone pretty please tell me what color code of the wires or where it goes into the loom . i have a small white 2 prong connector near this location . has a purple / white stripe and a red n yellow one . or pictures please

Remote starters were an optional extra on autos only so no soup for you!

what the hell is that box?? i got one with my M35 as well. doesnt appear to work!

Was an immobiliser/alarm fitted since arrival in Oz? If so your starter probably won't work. If not, try changing the batteries then push the 'check' button whilst near the car. The headlights should flash on then off for 1/2 a second.

Good luck!

Was an immobiliser/alarm fitted since arrival in Oz? If so your starter probably won't work. If not, try changing the batteries then push the 'check' button whilst near the car. The headlights should flash on then off for 1/2 a second.

Good luck!

nah no alarm or anything was added. but ill try changing the battery. thanks, i really should have thought of that myself lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...