Jump to content
SAU Community

Recommended Posts

Hello Every one,

Some of you might know, i have what you would call a Silvia, with a S1 RB25DET.

I am getting ready to pick up a standalone, and I can not decide what to get.

Lets start off with my goal, i plan on making about 450-500HP (335.56KW-372.85)

I am looking to get rid of the AFM (MAF) and switch to Map sensor also (reason why i don’t want a PFC)

There will be all supporting modifications to handle the 450-500HP (335.56KW-372.85) goal.

So that is not a problem

The type of driving will be, Drag/track/street

I was wondering what EMS to go with.

Motec

Haltech

Autronics

EMS

Any other(s)?

Price isnt to much of an issue, i just want to know what would be my best option.

There is a Autronics dealer/tuner in my town. Which is a friend of a friend...

He is 1 of 16 in the US the whole us. Which is why I am leaning to Autronics

Any Advice is appreciated

Edited by tomtomtuning
Link to comment
https://www.sau.com.au/forums/topic/169342-engine-management-systems/
Share on other sites

honestly id go with the curant model .haltech

ive got a smc autronic. its goot but has limited "fetures" ie only 4 ignition outputs etc etc. but the sm4 looks awsome :)

dont go a motec. not worth it. unless you are actually gonna use all the options available. (aditinal cost for acess codes )

ems no.

but most importanty pick one that everyone in your tuning arena is familiar with. no good having a good ecu and no one being able to tune it lol.

not really they run pretty good steering setups but get rid of the hicas asap or disable it..

neither of them can run air flow meters as they both run in built map sensors or i think they run external map sensors. one of the 2

Yeah i have removed the hicas, it was just a random thought crossing my mind. Just one of those rumors u hear and never really know if its true or not. I should probably post it up in another area.

Back on track. I didnt think they ran with airflow meters but obviously thats no big deal. I only ask all this because id always planned on a pfc, but everyone knows the story there. I hope paul can sort out modifying the rb26 ones as i really dont wanna fork out 3-4k for management.

one feture of the sm4 is the active knock control. (pulls back timing till its not knocking.) what other ecu has that available :) software is awsome. so easy to configure.

but if you want bells and whissles on paper the haltech is not a bad choise.

Autronic can run the airflow meter, i would definately go for the sm4, as its FA more than the older SMC, and has heaps more built in features that are useful, dwell control, closed loop idle and boost control, option of 6 ignition outputs and closed loop individual ignition control(only retards cylinders that are knocking), and launch control. I would argue that these feautres make them the most advanced ECU on the market at the moment, sure you cant datalog 8 channels at once, but who needs it when you can go faster due to this last feature. By the way, PFC can run without AFM.

I think the SM4 (Autronics) is really what i am leaning to.

Because i know the tuner is really good.

The SM4 will run me about ... 2,424.30 AUD (2000.00 US)

Plus 72.00 AUD (60.00 US) for the trigger wheel

And 193.944 AUD (160.00 US) for the ignition multiplexer

Plus tuning... WOW... extremely costly

I will still look into Haltech/Motec and see what the prices will before that.

  • 1 month later...

Bumping my old thread!!!!

I still haven’t decided what management i want to get

And I am about ready to order it; I haven’t done so already because I have been working on some other stuff on the car. My local tuner is trying to steer me into a new system from the UK called VEMS. But I am not sure if I really want to go with something that there isn’t a lot of knowledge about and/or support.

If I go with Haltech, I can only use the “E11v2” Right?

Since it’s the only one that has over 4 injector drivers?

The Autronics I think is just two costly, but then again the E11v2 is almost as expensive

Any suggestions?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it    Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher      I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...