Best Way To Pipe Front Mount Intercooler?

[BAMR33]

http://cgi.ebay.com.au/Intercooler-PIPING-...1QQcmdZViewItem

Intercooler piping no intercooler.

[BAMR33]

As for where to cut the hole, someone did have a DIY for it ie. measurements. That thing should be stickied somewhere because it's such a common question.

[jUsT-dRiFt-iT]

yeah ive looked but cant find it!

[jUsT-dRiFt-iT]

Does anybody have the link on how to cut the hole??

[RBwhatever]

Does anybody have the link on how to cut the hole??

If your wondering where you have to cut the hole, just get the kit and dummy fit it, that'll tell you where.

The hole should end up being just under the washer bottle.

Mark out where the hole is going to be then stitch drill it. A die-grinder comes in handy to smooth the edges.

After the put some rubber edging around the edge of the hole to stop the metal rubbing on the aluminium piping.

Remember to dummy fit the whole kit and intercooler together to make sure everything will line up.

[jUsT-dRiFt-iT]

Oh so what do i do with the washer bottle? Do i have to take it out?? And have no bottle?

[RBwhatever]

No the bottle stays where it is. It shouldn't have to move the whole time the kit is being fitted.

http://www.skylinesaustralia.com/forums/in...tercooler++hole

Here's a link. Look at post #10 for a couple of pics.

Its pretty much where the hole should be. Although don't just take his measurements and chop the hole out. Please dummy fit it before cutting the hole.