Jump to content
SAU Community

Recommended Posts

well RB25DE it seems to work well, i have a fuel consumption improvement as well as throttle response improvement, also with a fuel filter change/ If u do it properly by taking them out i think they just use compress air and detergents, im not sure. If u get ur car serviced sumwhere they should be able to do ur injectors

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-349723
Share on other sites

Check the Yellow Pages under "Fuel Injection" and you'll find some people who will come to you. You really should have them properly cleaned, but then use the shop stuff (Nulon and STP(?) are probably the best) to keep them in shape.

It is possible to remove/refit them yourself, just takes a bit of patience.

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-349832
Share on other sites

haha, i tried to remove one of my injectors a while back, gave up after trying to twist them out.. didn't really want to break one so i left it be.

I remember in my old car i was charged $200 for an injector clean, and not even sure whether they took them out and cleaned them properly (doubt it).. so just be careful you don't get ripped.

I tried some Wyns injector cleaner, didn't seem to do much in my skyline - not visible anyway.

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-349879
Share on other sites

yeah thats right i tried the Nulon $10 thingy a while back and did not really feel any difference:(

i dont know how difficult it is to take the injectors out. guess ill have to try and have a look.

i was told that there is a method where they (the pro) plumb this special treatment fluid into the fuel line and run the car for something like 20 min.??? and this will cost around $200

also i spoke to a mechanic a while back he said that using an ultrasonic cleaner is probably the best way.

mmm not sure which way to go.

ron

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-349993
Share on other sites

One of the best on the market is Redline SI-1 Cleaner. I would give that a shot. Its ~18 bucks. Its not your typical solvent style cleaner (heat activated detergent) so it wont clean out your petrol tank aswell.. go to www.redlineoil.com to get some more info about it..

If you cant find it, Nulons Total Fuel System Cleaner works well too.

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-350283
Share on other sites

You can't use compressed air to clean injectors, the holes are way too small. The only way to do it aside from fuel additives in your tank is with a special injector cleaning machine that uses ultrasonic sound waves to rattle the built-up particles free.

Try the bottled injector cleaner first, if that doesn't seem to work or not do much, fork over the $200 for the professional clean. Make sure you go to a reputable workshop. I had my Commodore's done, was quoted around $220 before I took it in, but when given the bill I saw I was slapped another couple of hours labour on top for removing and refitting. I could have them in and out in under half an hour.

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-353624
Share on other sites

Originally posted by ron

yeah thats right i tried the Nulon $10 thingy a while back and did not really feel any difference:(  

Ron

The effect of the fuel injector cleaner will depend on the condition of your fuel system.If injectors are dirty,then you may feel an improvement.But if they are clean already to begin with,naturaly there will be no benefit from using an injector cleaner.

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-353898
Share on other sites

A mechanic I knew once did some tests himself on injector cleaning products. His findings were that adding 1 litre of methylated spirits to a full tank was more effective than any product he used (typical off the shelf products).

Best result I saw myself was this guys EB falcon was running like crap, and he tried the wynns (spelling) stuff with no effect. After running 1 litre of metho in the car, and thrashing the crap out of it, it was much smoother, and fuel ecomony was slightly better, which indicated that the metho did the trick.

Still better to get them taken out and cleaned properly.

When I had mine cleaned in my last car (N/A R31) the only difference I niticed was improved economy...

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-359067
Share on other sites

My 2c,

I had my injectors professionally cleaned when we were troubleshooting a missfire. Definitely could feel the difference after cleaning. Improved economy, more of the throw-ya-back-in-your-seat feel :P. I haven't used the off the shelf products, so I can't really comment on them.

The injectors in an RB20 are held in using thin wire clips (U-shaped). Pull the clip off and the plug comes straight off. To put them back on, put the plug on first and then push the clip into place.

Michael

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-359347
Share on other sites

No side effect to turbo engines with injector cleaner or metho, because your turbo doesn't touch any of it. The only thing you have to be worried about is changing the octane of your fuel, but in such small doses that's not going to happen.

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-359400
Share on other sites

Originally posted by JimX

Could have been running like crap (at least partially) because of water.

Nah, it was running like crap for a while (months) not just the last tank....

If you use metho, make sure you go for a few long hard drives, as the metho itself can evaoporate. So if you add the 1 litre to a full tank, make sure you go though that tank in less than a week.

If your worried about octane levels, add octane booster before you add metho. It can only help...

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-360959
Share on other sites

yo ron... i just got my injectors cleaned for $22 each.... there is a place in Lidcombe 13/2 railway pde lidcomb its called AFI they specialise in cleaning injectors and all sorts of fuel stuff man...

i went there in person and hte dude said $16.50 but then told me that was trade price... kient so if u say ur from like a business then u get trade price....

if u want it done let me know man i will try get my mates performance company to get it done by them for trade price...

Link to comment
https://www.sau.com.au/forums/topic/16937-injector-cleaning/#findComment-366959
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
    • Twas your car many moons ago that gave me the idea!
×
×
  • Create New...