Jump to content
SAU Community

Recommended Posts

For sale

R33 Turbo. Came straight off half cut of rb25 not needed as using my hks turbo. Has no shaft play and is very good nick.

Has inlet elbow and oil and water lines as well as dump pipe.

Looking for offers over $300 can freight.

Phone 0408705412 or email [email protected]

Edited by ryan_o_grady
Link to comment
https://www.sau.com.au/forums/topic/169386-r33-rb25-turbo/
Share on other sites

Do you know what brand the short shifter is?

-Tom

When I got this gearbox I was told it was a C's short shifter.

I am unsure of how to check this but it definately has one.

I will also be selling rb20 coil packs and a bosch 040 pump both for $100 each.

Link to comment
https://www.sau.com.au/forums/topic/169386-r33-rb25-turbo/#findComment-3130826
Share on other sites

Change of schedule I will be in brisbane thursday day and also in gold coast that arvo.

If anyone would like something brought to them just let me know on my mobile number thanks.

PM's also replied to.

Link to comment
https://www.sau.com.au/forums/topic/169386-r33-rb25-turbo/#findComment-3134606
Share on other sites

Injectors are sold.

Gearbox will be sold without shifter.

Turbo will have pics up tomorrow in very good condition no shaft play good bearings etc. Comes with lines, elbow, dump pipe everything is there.

Link to comment
https://www.sau.com.au/forums/topic/169386-r33-rb25-turbo/#findComment-3141474
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...