Jump to content
SAU Community

Recommended Posts

G'day guys,

I know this is a very repetative topic "whats the max boost I can run?!?" :D

but I've heard that R33 Series 2s have plastic compressor wheels ... and my friend is wondering how much boost he can run :confused:

He only has a catback zorst and the bleed valve :D

Should he just set it at 10-11psi?

Cheers :)

Link to comment
https://www.sau.com.au/forums/topic/16950-max-boost-on-r33-series-2/
Share on other sites

The Nylon Impeller turbos were brought out in the R34's

Regardless though, the weakness is the ceramic turbine

I have a series two and have boosted mine to 13psi, although, i have a very efficiently cooling intercooler (~8degrees above ambient temps) and tuned properly

Running stock intercooler your best bet for your mate is 10psi in which case would most likey be at if he was to get a turbo back exhaust (so there will be no need for bleeding)

dont bother with bleeder valves or such, just tell him to get a dump/front pipe from the turbo and the boost pressure will increase natrually to 10psi

So Soulja, your engine is so inefficient that you have to run 32 psi to make any power. Get a decent engine and turbo and tune it properly so you can make the same power at 20 psi. Just like dinosaurs, big boost is ancient history. Get with the new millennium or you'll be extinct as well.

Guest INASNT
Originally posted by Sydneykid

So Soulja, your engine is so inefficient that you have to run 32 psi to make any power.  Get a decent engine and turbo and tune it properly so you can make the same power at 20 psi.  Just like dinosaurs, big boost is ancient history.  Get with the new millennium or you'll be extinct as well.

i doubt he even has a car! :bahaha:

back to topic. i agree with above.

do the full zorst fron turbo back/hi flo cat.

I get 9.5 psi and that's with my huge cooler.

12psi is the max. You can crank it to 13-14 but your turbo is not gonna last very long... curse the ceramic!

  • 8 years later...

I just put a full turbo back system on my 33 ser2 and boost is hitting 10 psi now instead of seven.. An it jut ayers coughing an farting as soon as it hits 10..

Anyone able to tell my how it could have changed my boost pressure an why it's not likin 10 psi?

Other mods being

Walbro fuel pump

Fmic

An have disconnected the 2 stage solenoid by earthing it..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...