Jump to content
SAU Community

Recommended Posts

Im looking for a reasonably cheap turbo upgrade for my car. I dont wanna spend stupid amounts of money at the moment as I plan on building up an engine next year and will purchase a dicent turbo then.

Just want something to give my rb20 alittle more go for the next year.

Has any one used these ebay special turbos and top mount manifolds?

What would you reccomend i get?

Have you got one that died pritty easily?

Link to comment
https://www.sau.com.au/forums/topic/170000-ebay-specials/
Share on other sites

If your going to get a different turbo next year anyway... and you dont wanna spend stupid amounts of money

Its overall better to wait that put don't dodgy turbo on there and suffer pain and heartache for week on end when the car is off the road

Link to comment
https://www.sau.com.au/forums/topic/170000-ebay-specials/#findComment-3141245
Share on other sites

all made in china...

everything made in china is shiieeeeet.

but then again everything we have here in aust is mostly from there....

somebody give da turbo a try.... LOL

lol 300 bucks a turboo.. mite work but the quality it'll shit itself i reckon ahaha who knows mate

actually im gonna go look to find if theres ones on warranty

and what the conditions are.... so if it breaks down get a new one... if its full shithouse get money back :unsure:

Edited by Zas)-(
Link to comment
https://www.sau.com.au/forums/topic/170000-ebay-specials/#findComment-3141300
Share on other sites

lol monster performance offers a 12 month warranty with every purchase

Specs:

. 50 a/r compressor

.63 a/r turbine

.57 trim

* We warrant that all products are Brand New and free from defective material and defective workmanship, and we agree to replace or repair any part that proves to be defective. However, this warranty does not cover damage due to misuse, abuse, incorrect assembly, improper and irregular maintenance, or accident or collision.

Please email us at [email protected] with any questions prior to bidding. No suitability of use is expressed or implied in this sale

This policy does not apply to damaged or incorrect installation. Professional installation is highly recommended and we may request a receipt if required in order to honor the warranty. Please verify suitability to your application prior to purchase, incorrect purchases are non refundable.

In the event of a fault of a part or product, we require the faulty part or product to be sent back to us. We will then examine and test the fault and replace or repair any item deemed to be faulty. Any replacement or refund is provided at our discretion, buyer is responsible for return shipping charges. Goods are to be returned in original packaging. *

i havent seen another turbo offering warranties of any kind..

somebody try em and post results

Link to comment
https://www.sau.com.au/forums/topic/170000-ebay-specials/#findComment-3141331
Share on other sites

I'd take something made in china over something made in boganville anyday.

Those knowledgeable people out there will agree with me that China has some very high quality stuff and it can be at a very good price. The thing is with China is that labour is very low, which works in your favour. Of course, there are vastly different levels of quality control ranging from very precise, to fairly ordinary.

If you know how to buy, you can get good stuff for a very reasonable price. Even the cheap stuff isn't too bad considering you didn't pay much for it anyways.

Compared to australia.... extremely overpriced and shit quality.

I know someone who installs those ebay turbos, and hasn't had problems with them. It's your choice at the end of the day though. I think a lot of people whinge about the ebay turbos when they don't really ahve experience wiht them at all (not all people, some).

It's a bit silly isn't it wanting to upgrade turbo and not wanting to spend more than $800. Wanting and getting are two different stories aren't they. I want 5 hot chicks, but I don't have 5 atm. What about ecu, injectors, maf, exhaust, clutch, wheels, tyres, diff, suspensions, tune etc that you need to make use of the turbo?

If you can spare more money now, then do it, if not, 'put up' with what you have until you do. It's not like the stock turbo'd engine is weak by anymeans. It's not crazily fast, but it's certainly faster than most cars out there.

Cheers

all made in china...

everything made in china is shiieeeeet.

but then again everything we have here in aust is mostly from there....

somebody give da turbo a try.... LOL

lol 300 bucks a turboo.. mite work but the quality it'll shit itself i reckon ahaha who knows mate

actually im gonna go look to find if theres ones on warranty

and what the conditions are.... so if it breaks down get a new one... if its full shithouse get money back :(

Link to comment
https://www.sau.com.au/forums/topic/170000-ebay-specials/#findComment-3142394
Share on other sites

I'd take something made in china over something made in boganville anyday.

Those knowledgeable people out there will agree with me that China has some very high quality stuff and it can be at a very good price. The thing is with China is that labour is very low, which works in your favour. Of course, there are vastly different levels of quality control ranging from very precise, to fairly ordinary.

If you know how to buy, you can get good stuff for a very reasonable price. Even the cheap stuff isn't too bad considering you didn't pay much for it anyways.

Compared to australia.... extremely overpriced and shit quality.

I know someone who installs those ebay turbos, and hasn't had problems with them. It's your choice at the end of the day though. I think a lot of people whinge about the ebay turbos when they don't really ahve experience wiht them at all (not all people, some).

Yeah, I agree that China has the capacity, and even now, do produce some 'good' stuff... However, there are some people around, myself included... That choose to not fund and/or support Communism... :(:D

Link to comment
https://www.sau.com.au/forums/topic/170000-ebay-specials/#findComment-3142612
Share on other sites

Well actaully i dont want to spend anymore than $800 on the turbo.

I am well aware that other things need to be done aswell.

My injectors will have another 50rwkw of life in them.

I will be also getting an ecu upgrade none of this comes under the $800 budget

Link to comment
https://www.sau.com.au/forums/topic/170000-ebay-specials/#findComment-3142636
Share on other sites

hi,

i purchased one of these kits off ebay last year... what they dont tell you is you need braided oil lines.. and to get custom dump pipes and cooler pipes for your car... i eventually installed it, cost me soo much money in the end that i didnt plan for. but i gotta tell you... they pull on these t3/t4 turbos in top end is unbelievable. i was running 14 pound boost and the car was getting a little bit wobbly even in 4th gear.... while it lasted it was great but it shat itself a week or so later.... if you do end up going ahead with buying the ebay kit, i've got all the parts at home if your interested, but not the turbo, bcoz it shti itself..

Well actaully i dont want to spend anymore than $800 on the turbo.

I am well aware that other things need to be done aswell.

My injectors will have another 50rwkw of life in them.

I will be also getting an ecu upgrade none of this comes under the $800 budget

Link to comment
https://www.sau.com.au/forums/topic/170000-ebay-specials/#findComment-3142953
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...