Jump to content
SAU Community

Hybrid Brand Intercooler Questions

Ultimategtr
 Share

Recommended Posts

Ultimategtr Proficient

Ultimategtr

Posted
  • Author
Posted

ok well i just paid for it.

i was emailing justin and he reckns that i dont need a seperate nipple to tee the w/g off.. said i can use the nipple provided for the bov.. but im using the stock bov.. i suppose i could use that right....??

wont give me any overboosting?

Gazee Grand Master

Gazee

Posted
Posted

it shouldn't spike if you have a EBC, if you have a bleed valve you might notice some spike but tapping it from the bov shouldn't be an issue, my setup doesn't have a nipple on the hot pipe going to the intercooler and holds boost no probs..

Ultimategtr Proficient

Ultimategtr

Posted
  • Author
Posted

sweet mate thanks for that. i have the greddy profec Spec II but not installed yet.. hav the standard hi boost mod to an incabin switch..

hopefully it doesnt spike as i heard it does if u have the standard solenoid setup

bernard R33 Enthusiast

bernard R33

Posted
Posted

make a little bracket for where u bolt the pipe near the rocker cover. i cant really explain properly man but u can mount the pipe a bit higher to avoid the fans hitting it rather that choppin the fan blades. thats what is done on mine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Not stock. All remade. Mostly looks stock because the pipes run to and from the standard holes in the inner guard to get to the return flow FMIC. I'm not sure which question you're trying to ask, because it seems like "stock position" vs "stock position".
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Hey, it's a GT-R, it's just as significant a moment as mine😁 It's not ideal when things are uncertain; I'm the type of person that always has a set plan for things in life so being unsure of this plan puts me in a weird place mentally.
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card style AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had no flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
×
×
  • Create New...