Jump to content
SAU Community

Recommended Posts

so you have the 90mm ti-r full titanium one?

i just called bankstown and told him how much you have them for. but he could only quote 1800. for a 32gtr

is there much difference? i'm going to need to probably modify it anyway to fit to the trust dumps as i had to modify them to fit also.

ah yeah that is the normal price. i just informed George about the list :worship: and sent the list throught to them.

i have a list of 330 items (5x greddy gtr plenums...$699 etc) i am clearing out and that 80mm PETIR exhaust was part of it, i would post up the list put i am not a sponsor and dont want to upset any one.

i do have a 90mm power evolution (v clamp with catout pipe) for R32 gtr on that list $699

Edited by URAS
  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

ah yeah that is the normal price.

i have a list of 330 items (5x greddy gtr plenums...$699 etc) i am clearing out and that 80mm PETIR exhaust was part of it, i will send the list throught to them now. i would post up the list put i am not a sponsor and dont want to upset any one.

i do have a 90mm power evolution (v clamp with catout pipe) for R32 gtr on that list $699

is that one full titanium? i've already got a 3.5 inch exhaust from dumps back. but its about 35kg!

ah yeah that is the normal price. i just informed George about the list :worship: and sent the list throught to them.

i have a list of 330 items (5x greddy gtr plenums...$699 etc) i am clearing out and that 80mm PETIR exhaust was part of it, i would post up the list put i am not a sponsor and dont want to upset any one.

i do have a 90mm power evolution (v clamp with catout pipe) for R32 gtr on that list $699

nah i have that exhaust and it's mild steel.

fat pipe though.

what's the price for the 90mm GTR32 Ti-R???

might have to upgrade...

X2

nengun sell the 90 for 1200ish. autobarn said 1800 but i want a 950 buck oner

how much difference is a 33gtr exhaust form a 32gtr?

yeah the 1800 quote was incorrect it was rrp, they should always match nengun

Edited by URAS
from what i've read. its a cat back :cheers:

The one that Luke has in the Pic's... From what he has told me basically deletes the cat soooo yeah, hence the reason it comes with the silencer i think.

I think i might deff be interested in a 80mm (R32) as well!

your going to have to post a audio/video clip of the car when the new zorst is on, i wanna hear it :D , should sound awsome with only 1 muffler, and possibly no cat.

Nengun says $1463.57 (90mm) delevered to Tassie. mmmmmmmmmm tempting, dam you giving me ways to spend money! :cheers:

Edited by sav man

as I understand it, as it is a "track" system, not the "street/circuit" model - the pipe connects straight to the end of the Front pipe - thus no cat pipe is required at all to make up this length. However I wont know for sure until I go to fit it.

Be careful with ordering this exhaust from Nengun - The box it comes in is pictured back on page 1, its bloody big! there is no way you can EMS a box this size.

The only way to airfreight would be DHL - initial quotes we were looking at to use DHL to airfreight this from Japan was in the region of $500+

so this rapidly increases the cost of the exhaust...

Trent's price at autobarn is insanely cheap - it must be 30 or 40 % below cost price - any stores here in Adelaide I spoke to about ordering this exhaust was $2k to get it for me. Sponsors on NS/SAU quoted me about $1800. The price listed on Trust website I think equates to about $1200/$1300, so when you factor in airfreight and import duty ontop of this, I was pretty happy to get mine all up for $1600 :cheers:

Edited by rb4door

nengun site says that only packages over 1.5m are a problem, and the only list the evo system as being too long. But i don't realy want to be spending money on one since I alrealy have a 80mm, and I need to upgrade my suspention. I should start a charety for myself :D

mmmmm 90mm full TI exhuasts...

that is one sexy mofo! - i highly reccomend u guys to get them if u can! the weight is insane.

as for volume - stand the F*ck back.

I'm running the Veilside 90mm Full TI cat back exhuast on the supra, its not a quiet beast...

but then again i am non turbo :D

stock cat back exhuast was 30kg + - this thing is less than 10 - its crazy.

but thats cause the TI exhuasts are thinner = louder than stainless....

plus no center muffler is bad...

but since most of u guys will have a turbo in ur cars should be a bit quieter (except on boost)

nengun site says that only packages over 1.5m are a problem, and the only list the evo system as being too long. But i don't realy want to be spending money on one since I alrealy have a 80mm, and I need to upgrade my suspention. I should start a charety for myself :D

I just measured the box, its 1.7 meters :P

Nengun wont send this to Australia unless you organise DHL

as I understand it, as it is a "track" system, not the "street/circuit" model - the pipe connects straight to the end of the Front pipe - thus no cat pipe is required at all to make up this length. However I wont know for sure until I go to fit it.

Be careful with ordering this exhaust from Nengun - The box it comes in is pictured back on page 1, its bloody big! there is no way you can EMS a box this size.

The only way to airfreight would be DHL - initial quotes we were looking at to use DHL to airfreight this from Japan was in the region of $500+

so this rapidly increases the cost of the exhaust...

Trent's price at autobarn is insanely cheap - it must be 30 or 40 % below cost price - any stores here in Adelaide I spoke to about ordering this exhaust was $2k to get it for me. Sponsors on NS/SAU quoted me about $1800. The price listed on Trust website I think equates to about $1200/$1300, so when you factor in airfreight and import duty ontop of this, I was pretty happy to get mine all up for $1600 :D

Bugger that it goes on without cat. i modified my trust dumps fo fit better and higher so modification to this titanium system will have to happen also.

p.s. I say no to Non flowing pussy! let the car breathe and let your rear bar get a coating of nice black richness!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...