Selling Everything To Date *price Drops In Last Post*

[meth]

see last post for price drops

Location: Melbourne

Contact: [email protected]

Phone: 0402-383-944 (email me if you can)

Please do not PM me and ask questions, I am most likely going to get emails quicker as I can check them at work etc.

All of this is off a Z32 - 2 seater targa

What is on hold pending payment or a pending a decision I have noted next to the item.

What's for sale:

Stillen GTZR Body kit (Brand new) Includes Sold / On Hold

-Type III side skirts

-GTZR Front facia

-GTZR Rear valance

-Ducted nose panel

-Door fillers

$2000 (for the entire kit) firm on this one

Pics can be seen at www.ttzed.com etc.

UAS Porsche GT3 Brake kit (used) Includes

-365mm Rotors

-6 Piston (Brembo) Porsche GT3 calipers

-Custom hats

-Custom adapters

-Teflon coated braided brake lines

-Ferrado 3000 pads (about 10mm of pad on each one)

$3500 (for the entire kit) ono

Garrett GT28RS Turbos Brand new with 0.64 Exhaust housing (Two of these - will split)

$3200 ono

Work Meister S1 2 Piece Rims (Excellent condition)

-White with polished alloy outer dish

-New 245/45 tire on the front

-80% tread 275/35 tires on the rear

-9.5" rear x 8.5 fronts"

-+30mm offsets

$3500 firm

H&R Racing Hub-Centric 5mm Spacers (Brand new Magnesium alloy - These are not cheap CNC aircraft quality rubbish i.e. you get what you pay for)

$180 ono

Zees quad exit 4" mufflers on hold

-Re-built and re-designed internals in 2.5" Y'd to 2" stainless steel perforated tube I can confidently say these will outflow any muffler (noise is quiet) which you can purchase straight off the shelf and last forever.

$1500ono

850CC Border Injector Kit on hold (scratched from laying around and also the AN fittings have been damaged (scratched) because of some idiot at a workshop) The Injectors were recently flow tested and cleaned as they had been sitting around and got dirty.

$1500 ono

Custom Subwoofer boxes (suit 2 seater only)

-These were made by Brad (DUB) and will need to be re-upholstered in vinyl or leather or whatever you wish to cover them up in as the existing stuff has stretched and torn here and there. These are an enclosed design.

$600

OGURA Twin Plate clutch kit and lightened flywheel-on hold This is almost brand new, was on a car for a week or so.

$1250 ono

Davies Craig electric water pump and thermo fan Brand new

-Thermo Fan - $160 for thermo fan

-Electric water pump - $155 for pump or

$300 for both ono

Illuminated Rear Panel (Genuine Nissan) on hold/sold

$350

Illuminated Door Stills (Genuine Nissan) on hold/sold

$350

Optima Yellow top battery (Replacement just before the car went off the road so it?s virtually brand new)

$400

Polished water pipes

$150ono

Ab-Flug Strut Bar on hold / sold

$600

HOK (House of Kolor) Violet Ice Pearl 6 ounces (enough to do a Large car)

$500 ono

Genuine OEM 3rd Brake Light

$240

Engine Pre-Lube kit (Brand new) as seen here - http://www.aus300zx.com/forum/showthread.php?t=251889

$200 ono

HICAS Eliminator Kit (brand new) I think it's Top Speed or something like that sold / on hold

$100

Solid Sub-Frame bushes

-$100

BODY

What has been done:

Every single wire in the engine bay bar the EFI Harness and 2 or 3 other wires have been re-located to behind the dash and into the fender walls ? including the harness which runs behind the radiator support. Aircon, and HICAS has been fully removed from the car. The fuseable link box, PTU and Relay box have been re-located to the passenger side footwell.

The car has never been in an accident ? there is your usual small dints here and there. The rear spoiler has been removed and is ready to be welded up (which I can do). The stone guard on the sides of the car has been removed back to the black zinc coating. The mounts in the engine bay for the HICAS and Relay Box - I have lead filled these (almost done) so that it looks as though they were never there. Full trim, interior is in excellent condition. The heater core has been replaced with a magna core along with genuine OEM heater core pipes and tap. All of the open cell foam was also replaced.

I know there is no 'offers' on this forum but I really do not know how much this is worth so if someone could PM me or point me in the right direction as to how much a reasonable price would be for this then please do so, so that I can ask a price. 

Includes headlights, etc - basically everything except for the engine.

Block sold

I am not going to part this block out. I am selling it AS IS with:

Brand new genuine OEM Nissan Bearings

ACL Main Studs

20thou oversized ACL Forged pistons and rings

Pistons skirts have been coated

Crower I Beam 4340c Conrods and Crower 2000 rod bolts

The rods have been balanced to within ~1g of each other and re-bushed then bored and honed to suit the ACL pins

Block was bored and honed with a torque plate that I had made up

Brand new Genuine OEM Harmonic Dampener

Everything was balanced to a 47% Overbalance (including the clutch)

Brand new Stainless Steel welsh plugs

All of the oil galleries have been ported out and radiused so that there are NO 90 degree bends in the entire system.

Main water passage has been fully ported out - you could almost fit a 20c piece right through the block.

Brand new genuine OEM oil pump - this has been stripped down and also had all of the 90 degree bends radiused.

All of the oil plugs were taken out / block was tapped and tapered plugs have been put into the block throughout.

Deck has been skimmed

I am not 100% sure on this price as I am still waiting for one last invoice but I will most likely be asking anything between - If someone makes me a reasonable offer between that amount then I will consider selling it now.

$4000-$5000 (not including the torque plate or the clutch)

Heads sold

These are not assembled yet (pulled apart again so I could do more work to the heads) except that the bronze valve guides have been pressed into the heads. Everything ran for about 1000kms so none of this is brand new. If I get good offers I will part the heads out.

Include

Fully ported and polished inlet and outlet runners (done by SGP Racing in the USA).

5 angle valve grind

Titanium retainers

JUN 264/9.5mm camshafts

JUN Cam gears (adjustable inlet and outlet ? these have been powder coated and chromed)

JUN heavy duty valve springs

Valves are all still within limits as they were pretty much all new before they went in.

I also have powder coated cam covers that match the cam gears and a balance tube.

Genuine OEM Full engine gasket kit.

$4500 ONO Disassembled No price on it assembled

I'm sure I have a lot more stuff sitting around but will post it up at a later date.

Edited June 30, 2007 by meth

[meth]

Update on what is sold.

Ab-Flug strut bar - sold

Body Kit - Sold

Block and heads - sold

hicas bar - sold

zees mufflers - sold

polished water pipes - sold

illuminated rear panels and kick panels - sold

border 850cc injector kit - on hold

[meth]

FYI Work Meisters are 18" - forgot to add in original post.

Price drops -

Turbos $1300ono each including postage.

Work Meisters - $3300.

Porsche GT3 Brake kit - $3250

Also have a HKS type 1 turbo timer - $100 + post.

[meth]

** Price drops **

Turbos $1200 posted each

18" Work meisters $3000

GT3 kit $3000