Jump to content
SAU Community

Recommended Posts

Bl4ck32: I hope there isn't a charge for freight. Earlier in this thread it said that freight was free. Maybe UAS can confirm this....it was the BIG selling point for me.

You could probably do a direct deposit to UAS so just ask them - cheaper than money order.

Not sure on deliveries...I'm just a customer. I plan to pay off the total cost around the 24th July when I get paid. I don't mind if it takes a week or two afterwards to get it delivered.

  • Replies 126
  • Created
  • Last Reply

Top Posters In This Topic

Free freight Australia wide and piping is alloy and 2 .5 inch, yes can get alloy pipes HPC coated in engine bay but have to get a price but expect about $100 or more extra.Brakets top and bottom of cooler for direct fit. If fitting yourself it does requir reo to be trimmed back a fair bit and front bar also depend on which type.

Group price for kit remains until end of the July. Hop on or miss out.

Sorry Richie. This deal is only for the Skyline kits. Will be doing something to the same effect at a later stage one on of the silvia/180 forums.

Hope I did'nt spoil your day :)

Hmm, nah it ok i am tough..:)

Well when you want to do something for the silvia forums let me know :D

Am a member of SliviaWa and i reckon that there would be some keen people there...

Not much in the way of cheaper good quality kits that i have found over here....

Boosted Zed - im in for sure. Just gotta sort out me engine - timing belt let go, so i might be up for rebuild or new engine.

I'll pay deposit in fortnight or so, funds permitting, then the rest by the last week of July. I'll have to ring u to get details for direct depost etc.

Hey boys, any chance you can supply me with black hoses instead of blue ? I can always spray them if I have to...but if its all the same to you...I'd love black ones instead...

Puppaduck--Yes can supply with black silicon hose no probs. Specify on your order or will end up coming with 'default blue'.

Black or Blue silicon hose only guys.

I'm definitely interested but do you know if it will fit behind stock front bar (not M-spec) or should I be looking for a front bar as well? Also can you kepp the stock airbox or do you have to go a pod?

Thanks

Will fit behind any bar but they will all need cutting and modification. Not hard, just need to take your time. On off on off. Trial and error. Obviously a bar with a large mouth to supply air to the cooler core is better than one that covers it up but its all about the $$$. Check our website out for a few different styles if you interested.

Stock airbox is cool (sometimes better as your not sucking hot air from the engine bay as you can do with a pod filter). A pod filter will breath better in most cases (and sound wicked also) but needs to be shielded from the engine bay via a box or petition. See the website for pics and details.

321 go, or boosted zed, Im gunna order the kit from me car.

Heres the deal, I gots the money before the end of the month, but its like the 31st, the last day to pay off the kit, sooo, if I pay the deposit b4, then the balance on the 31st is this ok?

Im gunna do a direct deposit, so if I fax the receipt or whatever on the 31st (during the day) I'm assuming you would know the balance has been paid?

I'm very interested in the kit, but would this be an overkill for a fairly stock R33 (3"dump/exhaust & airintake).

Taking into account I dont plan any major upgrades like Turbo or ECU... Probably just an S-AFC?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...